[PATCH 3/7] ARM: dts: microchip: sama5d2_icp: Update the node names from pmic-regulators

[Mihai Sain]

Update the node names from pmic-regulators in order to match
the datasheet and driver namings for buck regulators.
Using BUCK1-4 as node names is consistent with the node naming rules.

Signed-off-by: Mihai Sain <mihai.sain at microchip.com>
---
 arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
index 999adeca6f33..f20de8180381 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -194,7 +194,7 @@ mcp16502 at 5b {
 			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
 
 			regulators {
-				vdd_io_reg: VDD_IO {
+				vdd_io_reg: BUCK1 {
 					regulator-name = "VDD_IO";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -213,7 +213,7 @@ regulator-state-mem {
 					};
 				};
 
-				VDD_DDR {
+				BUCK2 {
 					regulator-name = "VDD_DDR";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
@@ -232,7 +232,7 @@ regulator-state-mem {
 					};
 				};
 
-				VDD_CORE {
+				BUCK3 {
 					regulator-name = "VDD_CORE";
 					regulator-min-microvolt = <1250000>;
 					regulator-max-microvolt = <1250000>;
@@ -251,7 +251,7 @@ regulator-state-mem {
 					};
 				};
 
-				VDD_OTHER {
+				BUCK4 {
 					regulator-name = "VDD_OTHER";
 					regulator-min-microvolt = <600000>;
 					regulator-max-microvolt = <1850000>;
-- 
2.44.0