[PATCH] arm64: dts: debix-a: Remove i2c2 from base .dts

[Laurent Pinchart]

On Tue, Mar 26, 2024 at 10:01:36AM +0000, Kieran Bingham wrote:
> Quoting Laurent Pinchart (2024-03-25 22:50:48)
> > From: Jacopo Mondi <jacopo at jmondi.org>
> > 
> > The I2C2 bus is used for the CSI and DSI connectors only, no devices are
> > connected to it on neither the Debix Model A nor its IO board. Remove
> > the bus from the board's .dts and rely on display panel or camera sensor
> > overlsy to enable it when necessary.
> 
> s/overlsy/overlays/

Oops. Shawn, could you fix this when taking the patch in your tree, or
would you live me to submit a v2 ?

> Reviewed-by: Kieran Bingham <kieran.bingham at ideasonboard.com>
> 
> > 
> > Signed-off-by: Jacopo Mondi <jacopo at jmondi.org>
> > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > ---
> >  .../boot/dts/freescale/imx8mp-debix-model-a.dts    | 14 --------------
> >  1 file changed, 14 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> > index 5ac77eaf23d5..26c303b7c7fa 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> > @@ -210,13 +210,6 @@ ldo5: LDO5 {
> >         };
> >  };
> >  
> > -&i2c2 {
> > -       clock-frequency = <100000>;
> > -       pinctrl-names = "default";
> > -       pinctrl-0 = <&pinctrl_i2c2>;
> > -       status = "okay";
> > -};
> > -
> >  &i2c3 {
> >         clock-frequency = <400000>;
> >         pinctrl-names = "default";
> > @@ -392,13 +385,6 @@ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA                                    0x400001c2
> >                 >;
> >         };
> >  
> > -       pinctrl_i2c2: i2c2grp {
> > -               fsl,pins = <
> > -                       MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL                                 0x400001c2
> > -                       MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA                                 0x400001c2
> > -               >;
> > -       };
> > -
> >         pinctrl_i2c3: i2c3grp {
> >                 fsl,pins = <
> >                         MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                                 0x400001c2

-- 
Regards,

Laurent Pinchart