[PATCH v2 1/4] arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi

[Tudor Ambarus]

The pinctrl nodes are coming from the shared gs101-pinctrl.dtsi,
thus the pinctrl-0/names shall stay in dtsi. Move them.

While moving, reverse the pinctrl-* lines, first pinctrl-0 then
pinctrl-names.

Reviewed-by: André Draszik <andre.draszik at linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus at linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 2 --
 arch/arm64/boot/dts/exynos/google/gs101.dtsi       | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
index 6ccade2c8cb4..9dc0f47ef646 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -103,8 +103,6 @@ key_power: key-power-pins {
 };
 
 &serial_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_bus>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 55e6bcb3689e..0b0db735dc8e 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -424,6 +424,8 @@ serial_0: serial at 10a00000 {
 				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
 					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
+				pinctrl-0 = <&uart0_bus>;
+				pinctrl-names = "default";
 				samsung,uart-fifosize = <256>;
 				status = "disabled";
 			};
-- 
2.44.0.396.g6e790dbe36-goog