[PATCH] arm64: dts: debix-a: Remove i2c2 from base .dts
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Mar 25 15:50:48 PDT 2024
From: Jacopo Mondi <jacopo at jmondi.org>
The I2C2 bus is used for the CSI and DSI connectors only, no devices are
connected to it on neither the Debix Model A nor its IO board. Remove
the bus from the board's .dts and rely on display panel or camera sensor
overlsy to enable it when necessary.
Signed-off-by: Jacopo Mondi <jacopo at jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
.../boot/dts/freescale/imx8mp-debix-model-a.dts | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 5ac77eaf23d5..26c303b7c7fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -210,13 +210,6 @@ ldo5: LDO5 {
};
};
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-};
-
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -392,13 +385,6 @@ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
- MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
- >;
- };
-
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list