[PATCH v1 0/1] phy: freescale: imx8m-pcie: facing pcie link-up instability

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>


In our automated testing setup, we use Delock Mini-PCIe SATA cards [1].
While this setup has proven very stable overall we noticed upstream on
the i.MX8M Mini fails quite regularly (about 50/50) to bring up the PCIe
link while with NXP's downstream BSP 5.15.71_2.2.2 it always works. As
that old downstream stuff was quite different, I first also tried NXP's
latest downstream BSP 6.1.55_2.2.0 which from a PCIe point of view is
fairly vanilla, however, also there the PCIe link-up was not stable.
Comparing and debugging I noticed that upstream explicitly configures
the AUX_PLL_REFCLK_SEL to I_PLL_REFCLK_FROM_SYSPLL while working
downstream [2] leaving it at reset defaults of AUX_IN (PLL clock).
Unfortunately, the TRM does not mention any further details about this
register (both for the i.MX 8M Mini as well as the Plus). Maybe somebody
from NXP could further comment on this?

BTW: On the i.MX 8M Plus we have not seen any issues with PCIe with the
exact same setup which is why I left it unchanged.

[1] https://www.delock.com/produkt/95233/merkmale.html
[2] https://github.com/nxp-imx/linux-imx/blob/lf-5.15.71-2.2.0/drivers/pci/controller/dwc/pci-imx6.c#L1548


Marcel Ziswiler (1):
  phy: freescale: imx8m-pcie: fix pcie link-up instability

 drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--
2.44.0