[PATCH v2 3/5] arm64: dts: freescale: Add device tree for Compulab SB-UCM-iMX8MPLUS
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Sun Mar 17 09:48:48 PDT 2024
The Compulab SB-UCM-iMX8MPLUS is a carrier board designed as an
evaluation board for the UCM-iMX8M-Plus SoM. It integrates support for
ethernet, USB, display (HDMI, DSI and LVDS), cameras (CSI-2 and GMSL),
audio and various other peripherals. Add a .dts that models the SB-UCM.
Not all peripherals present on the board are enabled yet, due to missing
support in mainline, or just because I couldn't test them all. Missing
features include PCIe, audio, camera, display, SIM and CAN. The I2C, SPI
and other buses routed to extensions connectors have also not been
tested. They can be added to the device tree at a later time.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
Changes since v1:
- Split HDMI to separate patch
- Enable pwm1
- Add 3V3_PER regulator
- Add DSI backlight
- Add pinctrl for DSI panel
- Add pinctrl for I2C5
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx8mp-sb-ucm.dts | 290 ++++++++++++++++++
2 files changed, 291 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-sb-ucm.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2cb0212b63c6..02efa97fc464 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -164,6 +164,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-sb-ucm.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm.dts b/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm.dts
new file mode 100644
index 000000000000..0141d85dc6a3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm.dts
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 CompuLab
+ * Copyright 2024 Ideas on Board Oy
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx8mp-pinfunc.h"
+#include "imx8mp-ucm.dtsi"
+
+/ {
+ model = "CompuLab SB-UCM-iMX8MPLUS";
+ compatible = "compulab,sb-ucm-imx8mp", "compulab,ucm-imx8mp", "fsl,imx8mp";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ dsi_backlight: backlight-dsi {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 3000000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <255>;
+ power-supply = <®_3v3_per>;
+ status = "disabled";
+ };
+
+ reg_3v3_per: regulator-3v3-per {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_per";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ usb-connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ hs_ep: endpoint {
+ remote-endpoint = <&usb3_hs_ep>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+
+ ss_ep: endpoint {
+ remote-endpoint = <&hd3ss3220_in_ep>;
+ };
+ };
+ };
+ };
+};
+
+&eqos {
+ status = "okay";
+};
+
+&i2c2 {
+ pca9555: gpio at 20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ usb-typec at 47 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x47>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ hd3ss3220_in_ep: endpoint {
+ remote-endpoint = <&ss_ep>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ hd3ss3220_out_ep: endpoint {
+ remote-endpoint = <&usb3_role_switch>;
+ };
+ };
+ };
+ };
+
+ eeprom at 54 {
+ compatible = "catalyst,24c08", "atmel,24c08";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5>;
+};
+
+&iomuxc {
+ pinctrl_dsi_panel: dsi-panelgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x16
+ >;
+ };
+
+ pinctrl_dsi_touch: dsi-touchgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x00
+ >;
+ };
+
+ pinctrl_i2c5: i2c5grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL 0x400001c2
+ MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116
+ >;
+ };
+
+ pinctrl_typec: typec1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x1c4
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+ >;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* Serial debug console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ usb3_hs_ep: endpoint {
+ remote-endpoint = <&hs_ep>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ usb3_role_switch: endpoint {
+ remote-endpoint = <&hd3ss3220_out_ep>;
+ };
+ };
+ };
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+/* Micro-SD socket */
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list