[PATCH 06/14] mips: dts: ralink: mt7621: reorder i2c node attributes

[Justin Swartz]

Rearrange the order of the i2c node's attributes so that they
are inline with the DTS style guide.

Signed-off-by: Justin Swartz <justin.swartz at risingedge.co.za>
---
 arch/mips/boot/dts/ralink/mt7621.dtsi | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 99d47f286..87a3bcbc0 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -104,18 +104,19 @@ i2c: i2c at 900 {
 			compatible = "mediatek,mt7621-i2c";
 			reg = <0x900 0x100>;
 
-			clocks = <&sysc MT7621_CLK_I2C>;
-			clock-names = "i2c";
-			resets = <&sysc MT7621_RST_I2C>;
-			reset-names = "i2c";
-
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			status = "disabled";
+			clocks = <&sysc MT7621_CLK_I2C>;
+			clock-names = "i2c";
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c_pins>;
+
+			resets = <&sysc MT7621_RST_I2C>;
+			reset-names = "i2c";
+
+			status = "disabled";
 		};
 
 		memc: memory-controller at 5000 {
--