[PATCH v3 8/8] dts: ti: k3-am625-beagleplay: Add mikroBUS

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Fri Mar 15 13:20:16 PDT 2024


On 15/03/2024 19:49, Ayush Singh wrote:
> Add mikroBUS connector support for Beagleplay.
> 
> Signed-off-by: Ayush Singh <ayushdevel1325 at gmail.com>
> ---
>  .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 76 +++++++++++++++++--
>  1 file changed, 68 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> index a34e0df2ab86..886308f99d1a 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> @@ -29,6 +29,7 @@ aliases {
>  		i2c3 = &main_i2c3;
>  		i2c4 = &wkup_i2c0;
>  		i2c5 = &mcu_i2c0;
> +		mikrobus0 = &mikrobus0;
>  		mmc0 = &sdhci0;
>  		mmc1 = &sdhci1;
>  		mmc2 = &sdhci2;
> @@ -230,6 +231,33 @@ simple-audio-card,codec {
>  		};
>  	};
>  
> +	mikrobus0: linux-mikrobus {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation


mikrobus {

> +		compatible = "mikrobus-connector";
> +		pinctrl-names = "default", "pwm_default", "pwm_gpio",
> +				"uart_default", "uart_gpio", "i2c_default",
> +				"i2c_gpio", "spi_default", "spi_gpio";
> +		pinctrl-0 = <&mikrobus_gpio_pins_default>;
> +		pinctrl-1 = <&mikrobus_pwm_pins_default>;
> +		pinctrl-2 = <&mikrobus_pwm_pins_gpio>;
> +		pinctrl-3 = <&mikrobus_uart_pins_default>;
> +		pinctrl-4 = <&mikrobus_uart_pins_gpio>;
> +		pinctrl-5 = <&mikrobus_i2c_pins_default>;
> +		pinctrl-6 = <&mikrobus_i2c_pins_gpio>;
> +		pinctrl-7 = <&mikrobus_spi_pins_default>;
> +		pinctrl-8 = <&mikrobus_spi_pins_gpio>;
> +		i2c-adapter = <&main_i2c3>;
> +		spi-controller = <&main_spi2>;
> +		spi-cs = <0 1>;
> +		uart = <&main_uart5>;
> +		pwms = <&ecap2 0 500000 0>;
> +		mikrobus-gpios =
> +		<&main_gpio1 11 GPIO_ACTIVE_HIGH>, <&main_gpio1 9 GPIO_ACTIVE_HIGH>,

Join with previous line.
> +		<&main_gpio1 24 GPIO_ACTIVE_HIGH>, <&main_gpio1 25 GPIO_ACTIVE_HIGH>,

Fix indentation. See DTS coding style.

> +		<&main_gpio1 22 GPIO_ACTIVE_HIGH>, <&main_gpio1 23 GPIO_ACTIVE_HIGH>,
> +		<&main_gpio1 7 GPIO_ACTIVE_HIGH>, <&main_gpio1 8 GPIO_ACTIVE_HIGH>,
> +		<&main_gpio1 14 GPIO_ACTIVE_HIGH>, <&main_gpio1 13 GPIO_ACTIVE_HIGH>,
> +		<&main_gpio1 12 GPIO_ACTIVE_HIGH>, <&main_gpio1 10 GPIO_ACTIVE_HIGH>;
> +	};
>  };
>  

>  
>  &main_spi2 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mikrobus_spi_pins_default>;
>  	status = "okay";
>  };
>  
> @@ -875,9 +932,8 @@ &main_uart1 {
>  };
>  
>  &main_uart5 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&mikrobus_uart_pins_default>;
>  	status = "okay";
> +	force-empty-serdev-controller;

NAK. Don't add undocumented properties. That's a clear no go.

Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list