[EXT] Re: [PATCH v8 05/10] dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties

[Frank Li]

On Wed, Mar 13, 2024 at 02:48:00AM +0000, Xu Yang wrote:
> 
> > 
> > On Tue, Mar 12, 2024 at 05:16:58PM +0800, Xu Yang wrote:
> > > Add restrictions for reg, interrupts, clock and clock-names properties
> > > for imx Socs.
> > >
> > > Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
> > >
> > > ---
> > > Changes in v4:
> > >  - new patch since v3's discussion
> > >  - split the reg, interrupts, clock and clock-names properties into
> > >    common part and device-specific
> > > Changes in v5:
> > >  - keep common property unchanged
> > >  - make if-then more readable
> > >  - remove non imx part
> > > Changes in v6:
> > >  - new patch based on ci-hdrc-usb2-imx.yaml
> > > Changes in v7:
> > >  - no changes
> > > Changes in v8:
> > >  - remove if:else:if:else:if:else block
> > > ---
> > >  .../bindings/usb/chipidea,usb2-imx.yaml       | 80 +++++++++++++++++++
> > >  1 file changed, 80 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> > b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> > > index cdbb224e9f68..fb1c378dfe88 100644
> > > --- a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> > > +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> > > @@ -49,6 +49,12 @@ properties:
> > >            - const: fsl,imx6ul-usb
> > >            - const: fsl,imx27-usb
> > >
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > >    clocks:
> > >      minItems: 1
> > >      maxItems: 3
> > > @@ -144,6 +150,80 @@ allOf:
> > >              - const: idle
> > >              - const: active
> > >
> > > +  # imx27 Soc needs three clocks
> > > +  - if:
> > > +      properties:
> > > +        compatible:
> > > +          const: fsl,imx27-usb
> > > +    then:
> > > +      properties:
> > > +        clocks:
> > > +          minItems: 3
> > > +          maxItems: 3
> > 
> > The max is already 3, so drop maxItems.
> 
> Okay.
> 
> > 
> > > +        clock-names:
> > > +          items:
> > > +            - const: ipg
> > > +            - const: ahb
> > > +            - const: per
> > > +
> > > +  # imx25 and imx35 Soc need three clocks
> > > +  - if:
> > > +      properties:
> > > +        compatible:
> > > +          contains:
> > > +            enum:
> > > +              - fsl,imx25-usb
> > > +              - fsl,imx35-usb
> > > +    then:
> > > +      properties:
> > > +        clocks:
> > > +          minItems: 3
> > > +          maxItems: 3
> > 
> > Same here.
> 
> Okay.
> 
> > 
> > > +        clock-names:
> > > +          items:
> > > +            - const: ipg
> > > +            - const: ahb
> > > +            - const: per
> > > +
> > > +  # imx7d Soc need one clock
> > > +  - if:
> > > +      properties:
> > > +        compatible:
> > > +          items:
> > > +            - const: fsl,imx7d-usb
> > > +            - const: fsl,imx27-usb
> > > +    then:
> > > +      properties:
> > > +        clocks:
> > > +          maxItems: 1
> > > +        clock-names:
> > > +          maxItems: 1
> > 
> > What's the name?
> 
> Can I not specify the name since the macro definition for USB
> controller clock in clock.h is recognizable and the driver doesn't
> get this clock by name rather index?

If clock-names is not required for fsl,imx7d-usb, 

clock-names: false

If driver use index to get clock, why need clock-names at other platform?
I supposed these should be the same for all chips.

Frank

> 
> Thanks,
> Xu Yang
>