[EXT] Re: [PATCH v2 3/3] arm64: dts: imx93-11x11-evk: add pca9451a support

[Joy Zou]

> -----Original Message-----
> From: Marco Felsch <m.felsch at pengutronix.de>
> Sent: 2024年3月11日 16:52
> To: Joy Zou <joy.zou at nxp.com>
> Cc: Jacky Bai <ping.bai at nxp.com>; lgirdwood at gmail.com;
> broonie at kernel.org; robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org;
> conor+dt at kernel.org; shawnguo at kernel.org; s.hauer at pengutronix.de;
> devicetree at vger.kernel.org; imx at lists.linux.dev; linux-kernel at vger.kernel.org;
> dl-linux-imx <linux-imx at nxp.com>; kernel at pengutronix.de;
> festevam at gmail.com; linux-arm-kernel at lists.infradead.org
> Subject: [EXT] Re: [PATCH v2 3/3] arm64: dts: imx93-11x11-evk: add
> pca9451a support
> 
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
> 
> 
> Hi,
> 
> On 24-03-11, Joy Zou wrote:
> > Support pca9451a on imx93-11x11-evk.
> >
> > Signed-off-by: Joy Zou <joy.zou at nxp.com>
> > ---
> >  .../boot/dts/freescale/imx93-11x11-evk.dts    | 112
> ++++++++++++++++++
> >  1 file changed, 112 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > index 9921ea13ab48..6cb5b7d745bf 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > @@ -183,6 +183,105 @@ &wdog3 {
> >       status = "okay";
> >  };
> >
> > +&lpi2c2 {
> > +     #address-cells = <1>;
> > +     #size-cells = <0>;
> > +     clock-frequency = <400000>;
> > +     pinctrl-names = "default", "sleep";
> > +     pinctrl-0 = <&pinctrl_lpi2c2>;
> > +     pinctrl-1 = <&pinctrl_lpi2c2>;
> > +     status = "okay";
> > +
> > +     pmic at 25 {
> > +             compatible = "nxp,pca9451a";
> > +             reg = <0x25>;
> > +             interrupt-parent = <&pcal6524>;
> > +             interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> > +
> > +             regulators {
> > +                     buck1: BUCK1 {
> > +                             regulator-name = "BUCK1";
> > +                             regulator-min-microvolt = <650000>;
> > +                             regulator-max-microvolt = <2237500>;
> 
> Can you please check you limits with the EE department? The constraints in a
> DTS file should reflect the board constraints and not the PMIC contraints.
Okay, I will check and modify the constraints.
Thank you very much!
BR
Joy Zou
> 
> Regards,
>   Marco
> 
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                             regulator-ramp-delay = <3125>;
> > +                     };
> > +
> > +                     buck2: BUCK2 {
> > +                             regulator-name = "BUCK2";
> > +                             regulator-min-microvolt = <600000>;
> > +                             regulator-max-microvolt = <2187500>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                             regulator-ramp-delay = <3125>;
> > +                     };
> > +
> > +                     buck4: BUCK4{
> > +                             regulator-name = "BUCK4";
> > +                             regulator-min-microvolt = <600000>;
> > +                             regulator-max-microvolt = <3400000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     buck5: BUCK5{
> > +                             regulator-name = "BUCK5";
> > +                             regulator-min-microvolt = <600000>;
> > +                             regulator-max-microvolt = <3400000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     buck6: BUCK6 {
> > +                             regulator-name = "BUCK6";
> > +                             regulator-min-microvolt = <600000>;
> > +                             regulator-max-microvolt = <3400000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     ldo1: LDO1 {
> > +                             regulator-name = "LDO1";
> > +                             regulator-min-microvolt = <1600000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     ldo4: LDO4 {
> > +                             regulator-name = "LDO4";
> > +                             regulator-min-microvolt = <800000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     ldo5: LDO5 {
> > +                             regulator-name = "LDO5";
> > +                             regulator-min-microvolt = <1800000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +             };
> > +     };
> > +
> > +     pcal6524: gpio at 22 {
> > +             compatible = "nxp,pcal6524";
> > +             pinctrl-names = "default";
> > +             pinctrl-0 = <&pinctrl_pcal6524>;
> > +             reg = <0x22>;
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +             interrupt-controller;
> > +             #interrupt-cells = <2>;
> > +             interrupt-parent = <&gpio3>;
> > +             interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> > +     };
> > +
> > +};
> > +
> >  &iomuxc {
> >       pinctrl_eqos: eqosgrp {
> >               fsl,pins = <
> > @@ -239,6 +338,19 @@ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B
> 0x31e
> >       };
> >
> >       /* need to config the SION for data and cmd pad, refer to
> > ERR052021 */
> > +     pinctrl_lpi2c2: lpi2c2grp {
> > +             fsl,pins = <
> > +                     MX93_PAD_I2C2_SCL__LPI2C2_SCL
> 0x40000b9e
> > +                     MX93_PAD_I2C2_SDA__LPI2C2_SDA
> 0x40000b9e
> > +             >;
> > +     };
> > +
> > +     pinctrl_pcal6524: pcal6524grp {
> > +             fsl,pins = <
> > +                     MX93_PAD_CCM_CLKO2__GPIO3_IO27
> 0x31e
> > +             >;
> > +     };
> > +
> >       pinctrl_usdhc1: usdhc1grp {
> >               fsl,pins = <
> >                       MX93_PAD_SD1_CLK__USDHC1_CLK
> 0x15fe
> > --
> > 2.37.1
> >
> >
> >