[PATCH v3] dt-bindings: imx-pata: Convert to dtschema

[Krzysztof Kozlowski]

On 09/03/2024 17:07, Animesh Agarwal wrote:
> Convert the imx-pata bindings to DT schema.
> 
> Signed-off-by: Animesh Agarwal <animeshagarwal28 at gmail.com>
> ---
> Changes in v3:
> - added fsl,imx51-pata in compatible property

Please explain the differences done during conversion in the commit msg.
There was no imx51 compatible in the binding before.

> 
> Changes in v2:
> - fixed style issues
> - compatible property now matches the examples
> - fixed yamllint warnings/errors
> ---
>  .../devicetree/bindings/ata/fsl,imx-pata.yaml | 40 +++++++++++++++++++
>  .../devicetree/bindings/ata/imx-pata.txt      | 16 --------
>  2 files changed, 40 insertions(+), 16 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml
>  delete mode 100644 Documentation/devicetree/bindings/ata/imx-pata.txt
> 
> diff --git a/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml b/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml
> new file mode 100644
> index 000000000000..265ea80434e1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/fsl,imx-pata.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ata/fsl,imx-pata.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX PATA Controller
> +
> +maintainers:
> +  - Animesh Agarwal <animeshagarwal28 at gmail.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,imx51-pata
> +      - const: fsl,imx27-pata

This allows only imx51 and disallows imx27 alone, which is not what old
bindings were saying.

The best if you just test it on DTS. Please run `make dtbs_check W=1`
(see Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

You should see two warnings for imx31 and imx51. You need imx31 as well
(and changes against pure conversion should be mentioned in commit msg).


Best regards,
Krzysztof