[PATCH] ARM: OMAP2+: prm33xx.c: Fix kerneldoc warnings

[Tony Lindgren]

Commit 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")
added a new kerneldoc warning as the function name changed:

warning: expecting prototype for am33xx_prm_global_warm_sw_reset().
Prototype was for am33xx_prm_global_sw_reset() instead

Turns out prm33xx.c produces a few other kerneldoc warnings so let's
fix them all.

Fixes: 6521f6a195c7 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")
Cc: Alexander Sverdlin <alexander.sverdlin at siemens.com>
Cc: Matthias Michel <matthias.michel at siemens.com>
Cc: Randy Dunlap <rdunlap at infradead.org>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/mach-omap2/prm33xx.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -48,8 +48,7 @@ static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
  * @part: PRM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
  * @rstctrl_offs: RM_RSTCTRL register address offset for this module
- *
- * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * @return: 1 if the (sub)module hardreset line is currently asserted,
  * 0 if the (sub)module hardreset line is not currently asserted, or
  * -EINVAL upon parameter error.
  */
@@ -70,14 +69,14 @@ static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
  * @shift: register bit shift corresponding to the reset line to assert
  * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @rstctrl_offs: RM_RSTCTRL register address offset for this module
+ * @return: Returns 0 upon success or -EINVAL upon an argument error
  *
  * Some IPs like dsp, ipu or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
  * IP.  These modules may have multiple hard-reset lines that reset
  * different 'submodules' inside the IP block.  This function will
- * place the submodule into reset.  Returns 0 upon success or -EINVAL
- * upon an argument error.
+ * place the submodule into reset.
  */
 static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
 				       u16 rstctrl_offs)
@@ -96,17 +95,18 @@ static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
  * @st_shift: reset status register bit shift corresponding to the reset line
  * @part: PRM partition, not used for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @rstst_reg: RM_RSTST register address for this module
+ * @rstctrl_offs: RM_RSTCTRL register address offset for this module
+ * @rstst_offs: RM_RSTST register address offset for this module
+ * @return: Returns 0 upon success or -EINVAL upon an argument error,
+ * -EEXIST if the submodule was already out of reset, or -EBUSY if the
+ * submodule did not exit reset promptly
  *
  * Some IPs like dsp, ipu or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
  * IP.  These modules may have multiple hard-reset lines that reset
  * different 'submodules' inside the IP block.  This function will
  * take the submodule out of reset and wait until the PRCM indicates
- * that the reset has completed before returning.  Returns 0 upon success or
- * -EINVAL upon an argument error, -EEXIST if the submodule was already out
- * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ * that the reset has completed before returning.
  */
 static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
 					 s16 inst, u16 rstctrl_offs,
@@ -315,7 +315,7 @@ static int am33xx_check_vcvp(void)
 }
 
 /**
- * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
+ * am33xx_prm_global_sw_reset - reboot the device via warm reset
  *
  * Immediately reboots the device through warm reset.
  */
-- 
2.43.1