[PATCH v2] mips: dts: ralink: mt7621: add cell count properties to usb

[Justin Swartz]

Add default #address-cells and #size-cells properties to the
usb node, which should be suitable for hubs and devices without
explicitly declared interface nodes, as:

  "#address-cells":
    description: should be 1 for hub nodes with device nodes,
      should be 2 for device nodes with interface nodes.
    enum: [1, 2]

  "#size-cells":
    const: 0

-- Documentation/devicetree/bindings/usb/usb-device.yaml

This version of the patch places the properties according to
the order recommended by:

   Documentation/devicetree/bindings/dts-coding-style.rst

Signed-off-by: Justin Swartz <justin.swartz at risingedge.co.za>
---
 arch/mips/boot/dts/ralink/mt7621.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 5a89f0b8c..7532e17dd 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -289,10 +289,10 @@ usb: usb at 1e1c0000 {
 		reg = <0x1e1c0000 0x1000
 		       0x1e1d0700 0x0100>;
 		reg-names = "mac", "ippc";
-
+		#address-cells = <1>;
+		#size-cells = <0>;
 		clocks = <&sysc MT7621_CLK_XTAL>;
 		clock-names = "sys_ck";
-
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
 	};
--