[PATCH v1 3/3] gpiolib: legacy: Remove unused gpio_request_array() and gpio_free_array()
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Thu Mar 7 05:49:05 PST 2024
No more users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
Documentation/driver-api/gpio/legacy.rst | 16 --------
.../zh_CN/driver-api/gpio/legacy.rst | 16 --------
Documentation/translations/zh_TW/gpio.txt | 17 --------
drivers/gpio/gpiolib-legacy.c | 39 -------------------
include/linux/gpio.h | 15 -------
5 files changed, 103 deletions(-)
diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
index b6505914791c..534dfe95d128 100644
--- a/Documentation/driver-api/gpio/legacy.rst
+++ b/Documentation/driver-api/gpio/legacy.rst
@@ -225,8 +225,6 @@ setup or driver probe/teardown code, so this is an easy constraint.)::
gpio_request()
## gpio_request_one()
- ## gpio_request_array()
- ## gpio_free_array()
gpio_free()
@@ -295,14 +293,6 @@ are claimed, three additional calls are defined::
*/
int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
- /* request multiple GPIOs in a single call
- */
- int gpio_request_array(struct gpio *array, size_t num);
-
- /* release multiple GPIOs in a single call
- */
- void gpio_free_array(struct gpio *array, size_t num);
-
where 'flags' is currently defined to specify the following properties:
* GPIOF_DIR_IN - to configure direction as input
@@ -341,12 +331,6 @@ A typical example of usage::
if (err)
...
- err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
- if (err)
- ...
-
- gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-
GPIOs mapped to IRQs
--------------------
diff --git a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
index aeccff777170..0faf042001d2 100644
--- a/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
+++ b/Documentation/translations/zh_CN/driver-api/gpio/legacy.rst
@@ -208,8 +208,6 @@ GPIO 值的命令需要等待其信息排到队首才发送命令,再获得其
gpio_request()
## gpio_request_one()
- ## gpio_request_array()
- ## gpio_free_array()
gpio_free()
@@ -272,14 +270,6 @@ gpio_request()前将这类细节配置好,例如使用引脚控制子系统的
*/
int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
- /* 在单个函数中申请多个 GPIO
- */
- int gpio_request_array(struct gpio *array, size_t num);
-
- /* 在单个函数中释放多个 GPIO
- */
- void gpio_free_array(struct gpio *array, size_t num);
-
这里 'flags' 当前定义可指定以下属性:
* GPIOF_DIR_IN - 配置方向为输入
@@ -317,12 +307,6 @@ gpio_request()前将这类细节配置好,例如使用引脚控制子系统的
if (err)
...
- err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
- if (err)
- ...
-
- gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-
GPIO 映射到 IRQ
----------------
diff --git a/Documentation/translations/zh_TW/gpio.txt b/Documentation/translations/zh_TW/gpio.txt
index b9b48012c62e..77d69d381316 100644
--- a/Documentation/translations/zh_TW/gpio.txt
+++ b/Documentation/translations/zh_TW/gpio.txt
@@ -215,13 +215,10 @@ GPIO 值的命令需要等待其信息排到隊首才發送命令,再獲得其
gpio_request()
## gpio_request_one()
-## gpio_request_array()
-## gpio_free_array()
gpio_free()
-
聲明和釋放 GPIO
----------------------------
爲了有助於捕獲系統配置錯誤,定義了兩個函數。
@@ -278,14 +275,6 @@ gpio_request()前將這類細節配置好,例如使用 pinctrl 子系統的映
*/
int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
- /* 在單個函數中申請多個 GPIO
- */
- int gpio_request_array(struct gpio *array, size_t num);
-
- /* 在單個函數中釋放多個 GPIO
- */
- void gpio_free_array(struct gpio *array, size_t num);
-
這裡 'flags' 當前定義可指定以下屬性:
* GPIOF_DIR_IN - 配置方向爲輸入
@@ -323,12 +312,6 @@ gpio_request()前將這類細節配置好,例如使用 pinctrl 子系統的映
if (err)
...
- err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
- if (err)
- ...
-
- gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-
GPIO 映射到 IRQ
--------------------
diff --git a/drivers/gpio/gpiolib-legacy.c b/drivers/gpio/gpiolib-legacy.c
index 3392e758d36f..5a9911ae9125 100644
--- a/drivers/gpio/gpiolib-legacy.c
+++ b/drivers/gpio/gpiolib-legacy.c
@@ -72,42 +72,3 @@ int gpio_request(unsigned gpio, const char *label)
return gpiod_request(desc, label);
}
EXPORT_SYMBOL_GPL(gpio_request);
-
-/**
- * gpio_request_array - request multiple GPIOs in a single call
- * @array: array of the 'struct gpio'
- * @num: how many GPIOs in the array
- *
- * **DEPRECATED** This function is deprecated and must not be used in new code.
- */
-int gpio_request_array(const struct gpio *array, size_t num)
-{
- int i, err;
-
- for (i = 0; i < num; i++, array++) {
- err = gpio_request_one(array->gpio, array->flags, array->label);
- if (err)
- goto err_free;
- }
- return 0;
-
-err_free:
- while (i--)
- gpio_free((--array)->gpio);
- return err;
-}
-EXPORT_SYMBOL_GPL(gpio_request_array);
-
-/**
- * gpio_free_array - release multiple GPIOs in a single call
- * @array: array of the 'struct gpio'
- * @num: how many GPIOs in the array
- *
- * **DEPRECATED** This function is deprecated and must not be used in new code.
- */
-void gpio_free_array(const struct gpio *array, size_t num)
-{
- while (num--)
- gpio_free((array++)->gpio);
-}
-EXPORT_SYMBOL_GPL(gpio_free_array);
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index f4e5406554bb..56ac7e7a2889 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -120,8 +120,6 @@ static inline int gpio_to_irq(unsigned gpio)
}
int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
-int gpio_request_array(const struct gpio *array, size_t num);
-void gpio_free_array(const struct gpio *array, size_t num);
/* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
@@ -152,11 +150,6 @@ static inline int gpio_request_one(unsigned gpio,
return -ENOSYS;
}
-static inline int gpio_request_array(const struct gpio *array, size_t num)
-{
- return -ENOSYS;
-}
-
static inline void gpio_free(unsigned gpio)
{
might_sleep();
@@ -165,14 +158,6 @@ static inline void gpio_free(unsigned gpio)
WARN_ON(1);
}
-static inline void gpio_free_array(const struct gpio *array, size_t num)
-{
- might_sleep();
-
- /* GPIO can never have been requested */
- WARN_ON(1);
-}
-
static inline int gpio_direction_input(unsigned gpio)
{
return -ENOSYS;
--
2.43.0.rc1.1.gbec44491f096
More information about the linux-arm-kernel
mailing list