[PATCH v3] pwm: imx27: workaround of the pwm output bug

[pratikmanvar09 at gmail.com]

Hello Francesco,

Sorry for the abysmal delay.
Thanks for your review and suggestions.

>Hello Pratik,
>
>On Wed, Jan 03, 2024 at 04:32:00PM +0530, pratikmanvar09 at gmail.com wrote:
>> From: Clark Wang <xiaoning.wang at nxp.com>
>> 
>> This fixes the pwm output bug when decrease the duty cycle.
>> This is a limited workaround for the PWM IP issue TKT0577206.
>> 
>> Root cause:
>> When the SAR FIFO is empty, the new write value will be directly applied
>> to SAR even the current period is not over.
>> If the new SAR value is less than the old one, and the counter is
>> greater than the new SAR value, the current period will not filp the
>> level. This will result in a pulse with a duty cycle of 100%.
>> 
>> Workaround:
>> Add an old value SAR write before updating the new duty cycle to SAR.
>> This will keep the new value is always in a not empty fifo, and can be
>> wait to update after a period finished.
>> 
>> Limitation:
>> This workaround can only solve this issue when the PWM period is longer
>> than 2us(or <500KHz).
>> 
>> Reviewed-by: Jun Li <jun.li at nxp.com>
>> Signed-off-by: Clark Wang <xiaoning.wang at nxp.com>
>> Link: https://github.com/nxp-imx/linux-imx/commit/16181cc4eee61d87cbaba0e5a479990507816317
>> Tested-by: Pratik Manvar <pratik.manvar at ifm.com>
>> Signed-off-by: Pratik Manvar <pratik.manvar at ifm.com>
>
>A very similar patch was already send in 2021 [1], did it had review
>comments not addressed? Please have a look.
>
>In general please refrain from sending a new patch version every other
>day, while every Linux kernel subsystem has different rules and a
>difference pace of development, in this specific case sending a v3 just
>adding your signed-off-by without allowing a little bit of time to wait
>for more feedback is just not sane.
Ok, I will keep this in mind. Thanks!
>
>[1] https://lore.kernel.org/all/?q=dfn%3Adrivers%2Fpwm%2Fpwm-imx27.c+AND+b%3A%22Clark+Wang%22
Ok, I did not check this. I will look into this. Thanks!

Thanks & Regards,
Pratik Manvar