[PATCH] arm64: dts: marvell: Add DTS for 7215-IXS-A1 board

[Natarajan Subbiramani]

From: Natarajan Subbiramani <natarajan.subbiramani.ext at nokia.com>

7215-IXS-A1 is an aggregation switch based on Marvell AlleyCat5X.
This dts is extracted from Marvell cn9130-crb and removed unused
nodes along with platform specific changes.

Signed-off-by: Natarajan Subbiramani <natarajan.subbiramani.ext at nokia.com>
---
 arch/arm64/boot/dts/marvell/7215-ixs-a1.dts | 226 ++++++++++++++++++++
 arch/arm64/boot/dts/marvell/Makefile        |   1 +
 2 files changed, 227 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/7215-ixs-a1.dts

diff --git a/arch/arm64/boot/dts/marvell/7215-ixs-a1.dts b/arch/arm64/boot/dts/marvell/7215-ixs-a1.dts
new file mode 100644
index 000000000000..e683b7ca4c9c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/7215-ixs-a1.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Nokia
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130.dtsi" /* include SoC device tree */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <0x02>;
+	#size-cells = <0x02>;
+	model = "7215 IXS-A1";
+	compatible = "marvell,cn9130\0marvell,armada-ap807-quad\0marvell,armada-ap807";
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <0x02>;
+		#size-cells = <0x02>;
+		ranges;
+
+		/delete-node/ psci-area at 4000000;
+
+		buf1: buffer at 4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x04000000 0x0 0x02000000>;
+			no-map;
+		};
+		psci-area at 6000000 {
+			reg = <0x0 0x06000000 0x0 0x00200000>;
+			no-map;
+		};
+	};
+
+	mv_dma {
+		compatible = "marvell,mv_dma";
+		memory-region = <&buf1>;
+		status = "okay";
+	};
+
+	cp0_usb3_0_phy0: cp0_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+	};
+
+	cp0_usb3_0_phy1: cp0_usb3_phy1 {
+		compatible = "usb-nop-xceiv";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_spi0_pins: cp0-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+	};
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <4>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 0
+		&cp0_comphy1 0
+		&cp0_comphy2 0
+		&cp0_comphy3 0>;
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* on-board eMMC U6 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	status = "okay";
+	non-removable;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+};
+
+/*Delete nodes that are not available*/
+/delete-node/ &cp0_rtc;
+/delete-node/ &cp0_sdhci0;
+/delete-node/ &cp0_crypto;
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	rtc at 68 {
+		compatible = "st,m41t11";
+		reg = <0x68>;
+	};
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	reg = <0x700680 0x50>,		/* control */
+	      <0x2000000 0x1000000>;	/* CS0 */
+	status = "okay";
+
+	flash at 0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "U-Boot";
+				reg = <0x0 0x2f0000>;
+			};
+
+			partition at 1 {
+				label = "U-Boot-Env";
+				reg = <0x2f0000 0x10000>;
+			};
+
+			partition at 2{
+				label = "Filesystem";
+				reg = <0x300000 0xd00000>;
+			};
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+		/* Management port LED blink activity*/
+		marvell,reg-init = <0x03 0x10 0x0 0x1140>;
+	};
+};
+
+&cp0_xmdio {
+	status = "disabled";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "disabled";
+};
+
+&cp0_eth2 {
+	/* This port uses "sgmii" phy-mode */
+	status = "okay";
+	phy = <&phy0>;
+	phys = <&cp0_comphy5 2>;
+	phy-mode = "sgmii";
+};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 99b8cb3c49e1..124a7d1fd5a8 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -28,3 +28,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += 7215-ixs-a1.dtb

base-commit: 6b6f1082cb46d72823b7ea99c058c601668ba1d3
-- 
2.34.1