[PATCH net-next v5 6/7] net: phy: qcom: at803x: Avoid hibernating if MAC requires RX clock

[Russell King (Oracle)]

On Fri, Mar 01, 2024 at 04:35:03PM +0100, Romain Gantois wrote:
> From: Russell King <linux at armlinux.org.uk>
> 
> Stmmac controllers connected to an at803x PHY cannot resume properly after
> suspend when WoL is enabled. This happens because the MAC requires an RX
> clock generated by the PHY to initialize its hardware properly. But the RX
> clock is cut when the PHY suspends and isn't brought up until the MAC
> driver resumes the phylink.
> 
> Prevent the at803x PHY driver from going into suspend if the attached MAC
> driver always requires an RX clock signal.
> 
> Reported-by: Clark Wang <xiaoning.wang at nxp.com>
> Link: https://lore.kernel.org/all/20230202081559.3553637-1-xiaoning.wang@nxp.com/
> Signed-off-by: Russell King <linux at armlinux.org.uk>

Wrong wrong wrong wrong wrong.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!