[PATCH v2 09/11] i2c: nomadik: support Mobileye EyeQ5 I2C controller

[Andi Shyti]

Hi Theo,

...

> +#include <linux/amba/bus.h>
>  #include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
>  #include <linux/init.h>
> -#include <linux/module.h>
> -#include <linux/amba/bus.h>
> -#include <linux/slab.h>
>  #include <linux/interrupt.h>
> -#include <linux/i2c.h>
> -#include <linux/err.h>
> -#include <linux/clk.h>
>  #include <linux/io.h>
> -#include <linux/pm_runtime.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/pinctrl/consumer.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>

Please reorder the headers in a different patch.

>  #define DRIVER_NAME "nmk-i2c"
>  

...

> +static inline u8 nmk_i2c_readb(const struct nmk_i2c_dev *priv,
> +			       unsigned long reg)
> +{
> +	if (priv->has_32b_bus)
> +		return readl(priv->virtbase + reg);
> +	else
> +		return readb(priv->virtbase + reg);

nit: no need for the else (your choice though, if you want to
have ti coherent with the write counterpart).

> +}
> +
> +static inline void nmk_i2c_writeb(const struct nmk_i2c_dev *priv, u32 val,
> +				unsigned long reg)
> +{
> +	if (priv->has_32b_bus)
> +		writel(val, priv->virtbase + reg);
> +	else
> +		writeb(val, priv->virtbase + reg);
> +}

...

> +static int nmk_i2c_eyeq5_probe(struct nmk_i2c_dev *priv)
> +{
> +	struct device *dev = &priv->adev->dev;
> +	struct device_node *np = dev->of_node;
> +	unsigned int shift, speed_mode;
> +	struct regmap *olb;
> +	unsigned int id;
> +
> +	priv->has_32b_bus = true;
> +
> +	olb = syscon_regmap_lookup_by_phandle_args(np, "mobileye,olb", 1, &id);
> +	if (IS_ERR_OR_NULL(olb)) {
> +		if (!olb)
> +			olb = ERR_PTR(-ENOENT);
> +		return dev_err_probe(dev, PTR_ERR(olb),
> +				     "failed OLB lookup: %lu\n", PTR_ERR(olb));

just return PTR_ERR(olb) and use dev_err_probe() in the upper
layer probe.

> +	}
> +
> +	if (priv->clk_freq <= 400000)
> +		speed_mode = 0b00;
> +	else if (priv->clk_freq <= 1000000)
> +		speed_mode = 0b01;
> +	else
> +		speed_mode = 0b10;

would be nice to have these as defines.

> +
> +	shift = NMK_I2C_EYEQ5_OLB_IOCR2_SHIFT(id);
> +	regmap_update_bits(olb, NMK_I2C_EYEQ5_OLB_IOCR2,
> +			   0b11 << shift, speed_mode << shift);

please define these values and for hexadecimals use 0x...

> +	return 0;
> +}
> +
>  static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
>  {
>  	int ret = 0;
> @@ -1001,8 +1065,17 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
>  
>  	priv->vendor = vendor;
>  	priv->adev = adev;
> +	priv->has_32b_bus = false;
>  	nmk_i2c_of_probe(np, priv);
>  
> +	if (of_device_is_compatible(np, "mobileye,eyeq5-i2c")) {
> +		ret = nmk_i2c_eyeq5_probe(priv);
> +		if (ret) {
> +			dev_info(dev, "%s: %d: %d\n", __func__, __LINE__, ret);
> +			return ret;
> +		}

as said above, use dev_err_probe here.

Andi

> +	}
> +
>  	if (priv->tft > max_fifo_threshold) {
>  		dev_warn(dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
>  			 priv->tft, max_fifo_threshold);
> 
> -- 
> 2.44.0
>