[RESEND, PATCH 2/5] soc: mediatek: mtk-cmdq: Add cmdq_pkt_mem_move() function

[Jason-JH.Lin]

Add cmdq_pkt_mem_move() function to support CMDQ user making
an instruction for moving a value from a source address to a
destination address.

Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 26 ++++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 10 ++++++++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index b0cd071c4719..3a1e47ad8a41 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -299,6 +299,32 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value);
 
+s32 cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr)
+{
+	s32 err;
+	const u16 tmp_reg_idx = CMDQ_THR_SPR_IDX0;
+	const u16 swap_reg_idx = CMDQ_THR_SPR_IDX1;
+
+	/* read the value of src_addr into swap_reg_idx */
+	err = cmdq_pkt_assign(pkt, tmp_reg_idx, CMDQ_ADDR_HIGH(src_addr));
+	if (err < 0)
+		return err;
+	err = cmdq_pkt_read_s(pkt, tmp_reg_idx, CMDQ_ADDR_LOW(src_addr), swap_reg_idx);
+	if (err < 0)
+		return err;
+
+	/* write the value of swap_reg_idx into dst_addr */
+	err = cmdq_pkt_assign(pkt, tmp_reg_idx, CMDQ_ADDR_HIGH(dst_addr));
+	if (err < 0)
+		return err;
+	err = cmdq_pkt_write_s(pkt, tmp_reg_idx, CMDQ_ADDR_LOW(dst_addr), swap_reg_idx);
+	if (err < 0)
+		return err;
+
+	return err;
+}
+EXPORT_SYMBOL(cmdq_pkt_mem_move);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 1dae80185f9f..b6dbe2d8f16a 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -182,6 +182,16 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 				u16 addr_low, u32 value, u32 mask);
 
+/**
+ * cmdq_pkt_mem_move() - append memory move command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @src_addr:	source address
+ * @dma_addr_t: destination address
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr);
+
 /**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
-- 
2.18.0