[PATCH] ARM: dts: stm32: Add ethernet MAC nvmem cells to DH STM32MP13xx DHCOR DHSBC board

[Marek Vasut]

Describe ethernet MAC address nvmem cells in DH STM32MP13xx DHCOR DHSBC
board DT. The MAC address can be fused in BSEC OTP fuses and used to set
up MAC address for both ethernet MACs on this board.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
Cc: Christophe Roullier <christophe.roullier at foss.st.com>
Cc: Conor Dooley <conor+dt at kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt at kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
Cc: Rob Herring <robh at kernel.org>
Cc: devicetree at vger.kernel.org
Cc: kernel at dh-electronics.com
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-stm32 at st-md-mailman.stormreply.com
---
 arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
index bacb70b4256bc..3cc9ad88d61bc 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
@@ -75,6 +75,8 @@ channel at 12 {
 };
 
 &ethernet1 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&ethernet_mac1_address>;
 	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-id";
 	pinctrl-0 = <&eth1_rgmii_pins_a>;
@@ -102,6 +104,8 @@ ethphy1: ethernet-phy at 1 {
 };
 
 &ethernet2 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&ethernet_mac2_address>;
 	phy-handle = <&ethphy2>;
 	phy-mode = "rgmii-id";
 	pinctrl-0 = <&eth2_rgmii_pins_a>;
-- 
2.43.0