[PATCH v5 10/16] media: platform: Add mali-c55 3a stats devnode
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Sat Jun 29 08:04:15 PDT 2024
Hi Dan,
On Thu, Jun 20, 2024 at 04:10:01PM +0100, Daniel Scally wrote:
> On 16/06/2024 22:19, Laurent Pinchart wrote:
> > On Wed, May 29, 2024 at 04:28:52PM +0100, Daniel Scally wrote:
> >> Add a new code file to govern the 3a statistics capture node.
> >>
> >> Acked-by: Nayden Kanchev <nayden.kanchev at arm.com>
> >> Co-developed-by: Jacopo Mondi <jacopo.mondi at ideasonboard.com>
> >> Signed-off-by: Jacopo Mondi <jacopo.mondi at ideasonboard.com>
> >> Signed-off-by: Daniel Scally <dan.scally at ideasonboard.com>
> >> ---
> >> Changes in v5:
> >>
> >> - New patch
> >>
> >> drivers/media/platform/arm/mali-c55/Makefile | 3 +-
> >> .../platform/arm/mali-c55/mali-c55-common.h | 28 ++
> >> .../platform/arm/mali-c55/mali-c55-core.c | 15 +
> >> .../platform/arm/mali-c55/mali-c55-isp.c | 1 +
> >> .../arm/mali-c55/mali-c55-registers.h | 3 +
> >> .../platform/arm/mali-c55/mali-c55-stats.c | 350 ++++++++++++++++++
> >> 6 files changed, 399 insertions(+), 1 deletion(-)
> >> create mode 100644 drivers/media/platform/arm/mali-c55/mali-c55-stats.c
> >>
> >> diff --git a/drivers/media/platform/arm/mali-c55/Makefile b/drivers/media/platform/arm/mali-c55/Makefile
> >> index 77dcb2fbf0f4..cd5a64bf0c62 100644
> >> --- a/drivers/media/platform/arm/mali-c55/Makefile
> >> +++ b/drivers/media/platform/arm/mali-c55/Makefile
> >> @@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \
> >> mali-c55-core.o \
> >> mali-c55-isp.o \
> >> mali-c55-tpg.o \
> >> - mali-c55-resizer.o
> >> + mali-c55-resizer.o \
> >> + mali-c55-stats.o
> >>
> >> obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o
> >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h b/drivers/media/platform/arm/mali-c55/mali-c55-common.h
> >> index 2d0c4d152beb..44119e04009b 100644
> >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h
> >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h
> >> @@ -79,6 +79,7 @@ enum mali_c55_isp_pads {
> >> MALI_C55_ISP_PAD_SINK_VIDEO,
> >> MALI_C55_ISP_PAD_SOURCE,
> >> MALI_C55_ISP_PAD_SOURCE_BYPASS,
> >> + MALI_C55_ISP_PAD_SOURCE_3A,
> >
> > Functions and structures are named with a "stats" suffix, let's call
> > this MALI_C55_ISP_PAD_SOURCE_STATS.
> >
> >> MALI_C55_ISP_NUM_PADS,
> >> };
> >>
> >> @@ -194,6 +195,28 @@ struct mali_c55_cap_dev {
> >> bool streaming;
> >> };
> >>
> >> +struct mali_c55_stats_buf {
> >> + struct vb2_v4l2_buffer vb;
> >> + spinlock_t lock;
> >
> > All locks require a comment to document what they protect. Same below.
> >
> >> + unsigned int segments_remaining;
> >> + struct list_head queue;
> >> + bool failed;
> >> +};
> >> +
> >> +struct mali_c55_stats {
> >> + struct mali_c55 *mali_c55;
> >> + struct video_device vdev;
> >> + struct dma_chan *channel;
> >> + struct vb2_queue queue;
> >> + struct media_pad pad;
> >> + struct mutex lock;
> >> +
> >> + struct {
> >> + spinlock_t lock;
> >> + struct list_head queue;
> >> + } buffers;
> >> +};
> >> +
> >> enum mali_c55_config_spaces {
> >> MALI_C55_CONFIG_PING,
> >> MALI_C55_CONFIG_PONG,
> >> @@ -224,6 +247,7 @@ struct mali_c55 {
> >> struct mali_c55_isp isp;
> >> struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS];
> >> struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS];
> >> + struct mali_c55_stats stats;
> >>
> >> struct list_head contexts;
> >> enum mali_c55_config_spaces next_config;
> >> @@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55);
> >> void mali_c55_unregister_resizers(struct mali_c55 *mali_c55);
> >> int mali_c55_register_capture_devs(struct mali_c55 *mali_c55);
> >> void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55);
> >> +int mali_c55_register_stats(struct mali_c55 *mali_c55);
> >> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55);
> >> struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55);
> >> void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev,
> >> enum mali_c55_planes plane);
> >> @@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt);
> >> bool mali_c55_isp_is_format_supported(unsigned int mbus_code);
> >> #define for_each_mali_isp_fmt(fmt)\
> >> for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));)
> >> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55,
> >> + enum mali_c55_config_spaces cfg_space);
> >>
> >> #endif /* _MALI_C55_COMMON_H */
> >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> >> index 50caf5ee7474..9ea70010876c 100644
> >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
> >> @@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55)
> >> }
> >> }
> >>
> >> + ret = media_create_pad_link(&mali_c55->isp.sd.entity,
> >> + MALI_C55_ISP_PAD_SOURCE_3A,
> >> + &mali_c55->stats.vdev.entity, 0,
> >> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
> >> + if (ret) {
> >> + dev_err(mali_c55->dev,
> >> + "failed to link ISP and 3a stats node\n");
> >
> > s/3a stats/stats/
> >
> >> + goto err_remove_links;
> >> + }
> >> +
> >> return 0;
> >>
> >> err_remove_links:
> >> @@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55)
> >> mali_c55_unregister_isp(mali_c55);
> >> mali_c55_unregister_resizers(mali_c55);
> >> mali_c55_unregister_capture_devs(mali_c55);
> >> + mali_c55_unregister_stats(mali_c55);
> >> }
> >>
> >> static int mali_c55_register_entities(struct mali_c55 *mali_c55)
> >> @@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55)
> >> if (ret)
> >> goto err_unregister_entities;
> >>
> >> + ret = mali_c55_register_stats(mali_c55);
> >> + if (ret)
> >> + goto err_unregister_entities;
> >> +
> >> ret = mali_c55_create_links(mali_c55);
> >> if (ret)
> >> goto err_unregister_entities;
> >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c
> >> index ea8b7b866e7a..94876fba3353 100644
> >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c
> >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c
> >> @@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55)
> >> isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK;
> >> isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> >> isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE;
> >> + isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE;
> >>
> >> ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS,
> >> isp->pads);
> >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
> >> index cb27abde2aa5..eb3719245ec3 100644
> >> --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
> >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
> >> @@ -68,6 +68,9 @@
> >> #define MALI_C55_VC_START(v) ((v) & 0xffff)
> >> #define MALI_C55_VC_SIZE(v) (((v) & 0xffff) << 16)
> >>
> >> +#define MALI_C55_REG_1024BIN_HIST 0x054a8
> >> +#define MALI_C55_1024BIN_HIST_SIZE 4096
> >> +
> >> /* Ping/Pong Configuration Space */
> >> #define MALI_C55_REG_BASE_ADDR 0x18e88
> >> #define MALI_C55_REG_BYPASS_0 0x18eac
> >> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c
> >> new file mode 100644
> >> index 000000000000..aa40480ed814
> >> --- /dev/null
> >> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c
> >> @@ -0,0 +1,350 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * ARM Mali-C55 ISP Driver - 3A Statistics capture device
> >> + *
> >> + * Copyright (C) 2023 Ideas on Board Oy
> >> + */
> >> +
> >> +#include <linux/dmaengine.h>
> >> +#include <linux/media/arm/mali-c55-config.h>
> >> +#include <linux/spinlock.h>
> >
> > You're missing some headers here, for
> >
> > container_of()
> > dev_err()
> > list_*()
> > mutex_init()
> > strscpy()
> > strscpy()
> >
> >> +
> >> +#include <media/media-entity.h>
> >> +#include <media/v4l2-dev.h>
> >> +#include <media/v4l2-event.h>
> >> +#include <media/v4l2-fh.h>
> >> +#include <media/v4l2-ioctl.h>
> >> +#include <media/videobuf2-core.h>
> >> +#include <media/videobuf2-dma-contig.h>
> >> +
> >> +#include "mali-c55-common.h"
> >> +#include "mali-c55-registers.h"
> >> +
> >> +static unsigned int metering_space_addrs[] = {
> >
> > const
> >
> >> + [MALI_C55_CONFIG_PING] = 0x095AC,
> >> + [MALI_C55_CONFIG_PONG] = 0x2156C,
> >
> > Lower-case hex constants.
> >
> >> +};
> >> +
> >> +static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh,
> >> + struct v4l2_fmtdesc *f)
> >> +{
> >> + if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE)
> >> + return -EINVAL;
> >> +
> >> + f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS;
> >
> > The format could be called V4L2_META_FMT_MALI_C55_STATS. While most
> > statistics are related to one of the 3A algorithms, I think it would be
> > better to name this generically. It's name bikeshedding only of course.
> >
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh,
> >> + struct v4l2_format *f)
> >> +{
> >> + static const struct v4l2_meta_format mfmt = {
> >> + .dataformat = V4L2_META_FMT_MALI_C55_3A_STATS,
> >> + .buffersize = sizeof(struct mali_c55_stats_buffer)
> >> + };
> >> +
> >> + if (f->type != V4L2_BUF_TYPE_META_CAPTURE)
> >> + return -EINVAL;
> >> +
> >> + f->fmt.meta = mfmt;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int mali_c55_stats_querycap(struct file *file,
> >> + void *priv, struct v4l2_capability *cap)
> >> +{
> >> + strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver));
> >> + strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card));
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = {
> >> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> >> + .vidioc_querybuf = vb2_ioctl_querybuf,
> >> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> >> + .vidioc_qbuf = vb2_ioctl_qbuf,
> >> + .vidioc_expbuf = vb2_ioctl_expbuf,
> >> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> >> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> >> + .vidioc_streamon = vb2_ioctl_streamon,
> >> + .vidioc_streamoff = vb2_ioctl_streamoff,
> >> + .vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap,
> >> + .vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap,
> >> + .vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap,
> >> + .vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap,
> >> + .vidioc_querycap = mali_c55_stats_querycap,
> >> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> >> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> >> +};
> >> +
> >> +static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = {
> >> + .owner = THIS_MODULE,
> >> + .unlocked_ioctl = video_ioctl2,
> >> + .open = v4l2_fh_open,
> >> + .release = vb2_fop_release,
> >> + .poll = vb2_fop_poll,
> >> + .mmap = vb2_fop_mmap,
> >> +};
> >> +
> >> +static int
> >> +mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers,
> >> + unsigned int *num_planes, unsigned int sizes[],
> >> + struct device *alloc_devs[])
> >> +{
> >> + struct mali_c55_stats *stats = vb2_get_drv_priv(q);
> >> +
> >> + if (*num_planes && *num_planes > 1)
> >> + return -EINVAL;
> >> +
> >> + if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer))
> >> + return -EINVAL;
> >> +
> >> + *num_planes = 1;
> >> + sizes[0] = sizeof(struct mali_c55_stats_buffer);
> >> +
> >> + if (stats->channel)
> >> + alloc_devs[0] = stats->channel->device->dev;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static void mali_c55_stats_buf_queue(struct vb2_buffer *vb)
> >> +{
> >> + struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue);
> >> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> >> + struct mali_c55_stats_buf *buf = container_of(vbuf,
> >> + struct mali_c55_stats_buf, vb);
> >> +
> >> + vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer));
> >> + buf->segments_remaining = 2;
> >> + buf->failed = false;
> >> +
> >> + spin_lock(&stats->buffers.lock);
> >
> > Isn't the DMA completion handler run from IRQ context ? If so you'll
> > need to use spin_lock_irq() here and in the other function that are
> > not called with interrupts disabled.
>
> They're run in the bottom half of the interrupt handler; I'm under the
> impression that that means the interrupts aren't disabled, and it's
> safe to do...is that mistaken?
I'm talking about the DMA completion handler, called by the DMA engine
subsystem, not the IRQs of the C55 itself.
> >> + list_add_tail(&buf->queue, &stats->buffers.queue);
> >> + spin_unlock(&stats->buffers.lock);
> >> +}
> >> +
> >> +static void mali_c55_stats_stop_streaming(struct vb2_queue *q)
> >> +{
> >> + struct mali_c55_stats *stats = vb2_get_drv_priv(q);
> >> + struct mali_c55_stats_buf *buf, *tmp;
> >> +
> >> + spin_lock(&stats->buffers.lock);
> >> +
> >> + list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) {
> >> + list_del(&buf->queue);
> >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> >> + }
> >> +
> >> + spin_unlock(&stats->buffers.lock);
> >> +}
> >> +
> >> +static const struct vb2_ops mali_c55_stats_vb2_ops = {
> >> + .queue_setup = mali_c55_stats_queue_setup,
> >> + .buf_queue = mali_c55_stats_buf_queue,
> >> + .wait_prepare = vb2_ops_wait_prepare,
> >> + .wait_finish = vb2_ops_wait_finish,
> >> + .stop_streaming = mali_c55_stats_stop_streaming,
> >> +};
> >> +
> >> +static void
> >> +mali_c55_stats_metering_complete(void *param,
> >> + const struct dmaengine_result *result)
> >> +{
> >> + struct mali_c55_stats_buf *buf = param;
> >> +
> >> + spin_lock(&buf->lock);
> >
> > I wonder if this is needed. Can the DMA engine call the completion
> > handlers of two sequential DMA transfers in parallel ?
>
> The DMA engine that's on the system we have can't...I wasn't sure
> whether that was generically true.
I think it is, but please double-check.
> >> +
> >> + if (buf->failed)
> >> + goto out_unlock;
> >> +
> >> + buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns();
> >> +
> >> + if (result->result != DMA_TRANS_NOERROR) {
> >> + buf->failed = true;
> >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> >
> > This will possibly return the buffer to userspace after the first DMA
> > transfer. Userspace could then requeue the buffer to the kernel before
> > the completion of the second DMA transfer. That will cause trouble. I
> > think you should instead do something like
> >
> > spin_lock(&buf->lock);
> >
> > if (result->result != DMA_TRANS_NOERROR)
> > buf->failed = true;
> >
> > if (!--buf->segments_remaining) {
> > buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns();
> > vb2_buffer_done(&buf->vb.vb2_buf, buf->failed ?
> > VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> > }
> >
> > spin_unlock(&buf->lock);
> >
> > The
> >
> > buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns();
> >
> > line could also be moved to mali_c55_stats_fill_buffer(), which would
> > make sure the timestamp is filled in case of DMA submission failures.
>
> Okedokey
>
> >
> >> + goto out_unlock;
> >> + }
> >> +
> >> + if (!--buf->segments_remaining)
> >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
> >> +
> >> +out_unlock:
> >> + spin_unlock(&buf->lock);
> >> +}
> >> +
> >> +static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src,
> >> + dma_addr_t dst,
> >> + struct mali_c55_stats_buf *buf,
> >> + size_t length,
> >> + void (*callback)(void *, const struct dmaengine_result *result))
> >
> > The same callback is used for both invocations of this function, you can
> > drop the parameter and hardcode it below.
>
> Yeah, not even sure now why I had a parameter.
>
> >> +{
> >> + struct dma_async_tx_descriptor *tx;
> >> + dma_cookie_t cookie;
> >> +
> >> + tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0);
> >> + if (!tx) {
> >> + dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n");
> >> + return -EIO;
> >> + }
> >> +
> >> + tx->callback_result = callback;
> >> + tx->callback_param = buf;
> >> +
> >> + cookie = dmaengine_submit(tx);
> >> + if (dma_submit_error(cookie)) {
> >> + dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n");
> >> + return -EIO;
> >> + }
> >> +
> >> + dma_async_issue_pending(stats->channel);
> >> + return 0;
> >> +}
> >> +
> >> +void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55,
> >> + enum mali_c55_config_spaces cfg_space)
> >> +{
> >> + struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55);
> >> + struct mali_c55_stats *stats = &mali_c55->stats;
> >> + struct mali_c55_stats_buf *buf = NULL;
> >> + dma_addr_t src, dst;
> >> + int ret;
> >> +
> >> + spin_lock(&stats->buffers.lock);
> >> + if (!list_empty(&stats->buffers.queue)) {
> >> + buf = list_first_entry(&stats->buffers.queue,
> >> + struct mali_c55_stats_buf, queue);
> >> + list_del(&buf->queue);
> >> + }
> >> + spin_unlock(&stats->buffers.lock);
> >> +
> >> + if (!buf)
> >> + return;
> >> +
> >> + buf->vb.sequence = mali_c55->isp.frame_sequence;
> >> +
> >> + /*
> >> + * There are infact two noncontiguous sections of the ISP's
> >
> > s/infact/in fact/
> >
> >> + * memory space that hold statistics for 3a algorithms to use. A
> >
> > s/use. A/use: a/
> >
> >> + * section in each config space and a global section holding
> >> + * histograms which is double buffered and so holds data for the
> >> + * last frame. We need to read both.
> >> + */
> >> + src = ctx->base + MALI_C55_REG_1024BIN_HIST;
> >> + dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
> >> +
> >> + ret = mali_c55_stats_dma_xfer(stats, src, dst, buf,
> >> + MALI_C55_1024BIN_HIST_SIZE,
> >> + mali_c55_stats_metering_complete);
> >> + if (ret)
> >> + goto err_fail_buffer;
> >> +
> >> + src = ctx->base + metering_space_addrs[cfg_space];
> >> + dst += MALI_C55_1024BIN_HIST_SIZE;
> >> +
> >> + ret = mali_c55_stats_dma_xfer(
> >> + stats, src, dst, buf,
> >> + sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE,
> >> + mali_c55_stats_metering_complete);
> >> + if (ret) {
> >> + dmaengine_terminate_sync(stats->channel);
> >> + goto err_fail_buffer;
> >> + }
> >
> > I think you will need to terminate DMA transfers at stream off time.
> >
> >> +
> >> + return;
> >> +
> >> +err_fail_buffer:
> >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> >> +}
> >> +
> >> +void mali_c55_unregister_stats(struct mali_c55 *mali_c55)
> >> +{
> >> + struct mali_c55_stats *stats = &mali_c55->stats;
> >> +
> >> + if (!video_is_registered(&stats->vdev))
> >> + return;
> >> +
> >> + vb2_video_unregister_device(&stats->vdev);
> >> + media_entity_cleanup(&stats->vdev.entity);
> >> + dma_release_channel(stats->channel);
> >> + mutex_destroy(&stats->lock);
> >> +}
> >> +
> >> +int mali_c55_register_stats(struct mali_c55 *mali_c55)
> >> +{
> >> + struct mali_c55_stats *stats = &mali_c55->stats;
> >> + struct video_device *vdev = &stats->vdev;
> >> + struct vb2_queue *vb2q = &stats->queue;
> >> + dma_cap_mask_t mask;
> >> + int ret;
> >> +
> >> + mutex_init(&stats->lock);
> >> + INIT_LIST_HEAD(&stats->buffers.queue);
> >> +
> >> + dma_cap_zero(mask);
> >> + dma_cap_set(DMA_MEMCPY, mask);
> >> +
> >> + stats->channel = dma_request_channel(mask, 0, NULL);
> >
> > Do we need a CPU fallback in case no DMA is available ?
>
> Yes, actually.
>
> > I'm still very curious to know how long it takes to perform the DMA
> > transfer, compared to copying the data with the CPU, and especially
> > compared to the frame duration.
>
> On my list of things to test and report :)
Looking forward to it :-)
> >> + if (!stats->channel) {
> >> + ret = -ENODEV;
> >> + goto err_destroy_mutex;
> >> + }
> >> +
> >> + stats->pad.flags = MEDIA_PAD_FL_SINK;
> >> + ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad);
> >> + if (ret)
> >> + goto err_release_dma_channel;
> >> +
> >> + vb2q->type = V4L2_BUF_TYPE_META_CAPTURE;
> >> + vb2q->io_modes = VB2_MMAP | VB2_DMABUF;
> >> + vb2q->drv_priv = stats;
> >> + vb2q->mem_ops = &vb2_dma_contig_memops;
> >> + vb2q->ops = &mali_c55_stats_vb2_ops;
> >> + vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf);
> >> + vb2q->min_queued_buffers = 1;
> >> + vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> >> + vb2q->lock = &stats->lock;
> >> + vb2q->dev = mali_c55->dev;
> >
> > That's not the right device. The device that performs the DMA operation
> > is the DMA engine, and that's what you need to pass to vb2. Otherwise
> > the DMA address returned by vb2_dma_contig_plane_dma_addr() will be
> > mapped to the ISP device, not the DMA engine. In practice, if neither
> > are behind an IOMMU, things will likely work, but when that's not the
> > case, run into problems.
> >
> >> +
> >> + ret = vb2_queue_init(vb2q);
> >> + if (ret) {
> >> + dev_err(mali_c55->dev, "stats vb2 queue init failed\n");
> >> + goto err_cleanup_entity;
> >> + }
> >> +
> >> + strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name));
> >
> > s/3a //
> >
> >> + vdev->release = video_device_release_empty;
> >
> > That's never right. You should refcount the data structures to ensure
> > proper lifetime management.
> >
> >> + vdev->fops = &mali_c55_stats_v4l2_fops;
> >> + vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops;
> >> + vdev->lock = &stats->lock;
> >> + vdev->v4l2_dev = &mali_c55->v4l2_dev;
> >> + vdev->queue = &stats->queue;
> >> + vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING;
> >> + vdev->vfl_dir = VFL_DIR_RX;
> >> + video_set_drvdata(vdev, stats);
> >> +
> >> + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
> >> + if (ret) {
> >> + dev_err(mali_c55->dev,
> >> + "failed to register stats video device\n");
> >> + goto err_release_vb2q;
> >> + }
> >> +
> >> + stats->mali_c55 = mali_c55;
> >> +
> >> + return 0;
> >> +
> >> +err_release_vb2q:
> >> + vb2_queue_release(vb2q);
> >> +err_cleanup_entity:
> >> + media_entity_cleanup(&stats->vdev.entity);
> >> +err_release_dma_channel:
> >> + dma_release_channel(stats->channel);
> >> +err_destroy_mutex:
> >> + mutex_destroy(&stats->lock);
> >> +
> >> + return ret;
> >> +}
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list