[PATCH] ARM: dts: stm32: Fix STM32MP13xx pinmux node eth2-rgmii-sleep-0 copy-paste error

[Marek Vasut]

On 6/27/24 10:22 AM, Alexandre TORGUE wrote:
> Hi Marek
> 
> On 6/26/24 05:07, Marek Vasut wrote:
>> Fix pin copy-paste error in STM32MP13xx eth2-rgmii-sleep-0 pinmux
>> node. Clearly the pins like PG11 are not supposed to be duplicated
>> in the node pinmux property, fix them up to match the hardware pin
>> assignment.
>>
>> Fixes: d1193e65647e ("ARM: dts: stm32: Add pinmux nodes for DH 
>> electronics STM32MP13xx DHCOR SoM and DHSBC board")
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> ---
>> Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
>> Cc: Christophe Roullier <christophe.roullier at foss.st.com>
>> Cc: Conor Dooley <conor+dt at kernel.org>
>> Cc: Krzysztof Kozlowski <krzk+dt at kernel.org>
>> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>> Cc: Rob Herring <robh at kernel.org>
>> Cc: devicetree at vger.kernel.org
>> Cc: kernel at dh-electronics.com
>> Cc: linux-arm-kernel at lists.infradead.org
>> Cc: linux-stm32 at st-md-mailman.stormreply.com
>> ---
>>   arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 14 +++++++-------
>>   1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi 
>> b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
>> index 42995a8f5034c..9c7cf8f3c3e8b 100644
>> --- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
>> @@ -157,16 +157,16 @@ eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
>>           pins1 {
>>               pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* 
>> ETH_RGMII_TXD0 */
>>                    <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */
>> -                 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD2 */
>> -                 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
>> -                 <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RGMII_TX_CTL */
>> -                 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_GTX_CLK */
>> -                 <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
>> +                 <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */
>> +                 <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */
>> +                 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */
>> +                 <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */
>> +                 <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */
>>                    <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
>>                    <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
>>                    <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
>> -                 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD2 */
>> -                 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD3 */
>> +                 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
>> +                 <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */
>>                    <STM32_PINMUX('A', 12, ANALOG)>, /* 
>> ETH_RGMII_RX_CTL */
>>                    <STM32_PINMUX('H', 11, ANALOG)>; /* 
>> ETH_RGMII_RX_CLK */
>>           };
> 
> Applied on stm32-next. I think I'll squash the two fixes (this patch and 
> the other one for the makefile) onto the initial patch when I create my 
> PR vor v6.11.

Fine by me, thanks !