[PATCH v9 23/26] ARM: dts: aspeed: yosemite4: add fan led config

Delphine CC Chiu Delphine_CC_Chiu at wiwynn.com
Wed Jun 26 02:07:39 PDT 2024


Set fan led config in yosemite4 DTS.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 152 +++++++++++++++++-
 1 file changed, 150 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 21ca22281ef8..2cbb210ed53e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -75,6 +75,154 @@ tpmdev at 0 {
 			reg = <0>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan4_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio0 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan4_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan5_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan5_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan6_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan6_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan7_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan7_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan8_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan8_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio0 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan9_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio0 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan9_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan10_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan10_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan11_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&led_gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		fan11_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&led_gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &uart1 {
@@ -1198,7 +1346,7 @@ eeprom at 52 {
 				reg = <0x52>;
 			};
 
-			gpio at 61 {
+			led_gpio0: gpio at 61 {
 				compatible = "nxp,pca9552";
 				reg = <0x61>;
 				#address-cells = <1>;
@@ -1268,7 +1416,7 @@ eeprom at 52 {
 				reg = <0x52>;
 			};
 
-			gpio at 61 {
+			led_gpio1: gpio at 61 {
 				compatible = "nxp,pca9552";
 				reg = <0x61>;
 				#address-cells = <1>;
-- 
2.25.1




More information about the linux-arm-kernel mailing list