[PATCH net-next v8 06/13] net: phy: mediatek: Hook LED helper functions in mtk-ge.c
Sky Huang
SkyLake.Huang at mediatek.com
Fri Jun 21 05:20:38 PDT 2024
From: "SkyLake.Huang" <skylake.huang at mediatek.com>
We have mtk-phy-lib.c now so that we can use LED helper functions in
mtk-ge.c(mt7531 part). It also means that mt7531/mt7981/mt7988's
Giga ethernet phys share almost the same HW LED controller design.
Also, add probe function for mt7531 so that it can initialize LED state.
Signed-off-by: SkyLake.Huang <skylake.huang at mediatek.com>
---
drivers/net/phy/mediatek/mtk-ge.c | 105 ++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/drivers/net/phy/mediatek/mtk-ge.c b/drivers/net/phy/mediatek/mtk-ge.c
index 9122899..c338bba 100644
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -13,6 +13,10 @@
#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+struct mtk_gephy_priv {
+ unsigned long led_state;
+};
+
static void mtk_gephy_config_init(struct phy_device *phydev)
{
/* Enable HW auto downshift */
@@ -57,6 +61,101 @@ static int mt7531_phy_config_init(struct phy_device *phydev)
return 0;
}
+static int mt7531_phy_probe(struct phy_device *phydev)
+{
+ struct mtk_gephy_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_gephy_priv),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ mtk_phy_leds_state_init(phydev);
+
+ return 0;
+}
+
+static int mt753x_phy_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mtk_gephy_priv *priv = phydev->priv;
+ bool blinking = false;
+ int err = 0;
+
+ if (index > 1)
+ return -EINVAL;
+
+ if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
+ blinking = true;
+ *delay_on = 50;
+ *delay_off = 50;
+ }
+
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state,
+ blinking);
+ if (err)
+ return err;
+
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state,
+ MTK_GPHY_LED_ON_MASK, false);
+}
+
+static int mt753x_phy_led_brightness_set(struct phy_device *phydev,
+ u8 index, enum led_brightness value)
+{
+ struct mtk_gephy_priv *priv = phydev->priv;
+ int err;
+
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state, false);
+ if (err)
+ return err;
+
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state,
+ MTK_GPHY_LED_ON_MASK, (value != LED_OFF));
+}
+
+static const unsigned long supported_triggers =
+ (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
+ BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX));
+
+static int mt753x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ return mtk_phy_led_hw_is_supported(phydev, index, rules,
+ supported_triggers);
+}
+
+static int mt753x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules)
+{
+ struct mtk_gephy_priv *priv = phydev->priv;
+
+ return mtk_phy_led_hw_ctrl_get(phydev, index, rules, &priv->led_state,
+ MTK_GPHY_LED_ON_SET,
+ MTK_GPHY_LED_RX_BLINK_SET,
+ MTK_GPHY_LED_TX_BLINK_SET);
+};
+
+static int mt753x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ struct mtk_gephy_priv *priv = phydev->priv;
+
+ return mtk_phy_led_hw_ctrl_set(phydev, index, rules, &priv->led_state,
+ MTK_GPHY_LED_ON_SET,
+ MTK_GPHY_LED_RX_BLINK_SET,
+ MTK_GPHY_LED_TX_BLINK_SET);
+};
+
static struct phy_driver mtk_gephy_driver[] = {
{
PHY_ID_MATCH_EXACT(0x03a29412),
@@ -75,6 +174,7 @@ static struct phy_driver mtk_gephy_driver[] = {
{
PHY_ID_MATCH_EXACT(0x03a29441),
.name = "MediaTek MT7531 PHY",
+ .probe = mt7531_phy_probe,
.config_init = mt7531_phy_config_init,
/* Interrupts are handled by the switch, not the PHY
* itself.
@@ -85,6 +185,11 @@ static struct phy_driver mtk_gephy_driver[] = {
.resume = genphy_resume,
.read_page = mtk_phy_read_page,
.write_page = mtk_phy_write_page,
+ .led_blink_set = mt753x_phy_led_blink_set,
+ .led_brightness_set = mt753x_phy_led_brightness_set,
+ .led_hw_is_supported = mt753x_phy_led_hw_is_supported,
+ .led_hw_control_set = mt753x_phy_led_hw_control_set,
+ .led_hw_control_get = mt753x_phy_led_hw_control_get,
},
};
--
2.34.1
More information about the linux-arm-kernel
mailing list