[PATCH 2/3] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board

[Marek Vasut]

On 6/10/24 10:03 AM, Christophe Roullier wrote:
> Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board.
> ethernet1: RMII with crystal.
> ethernet2: RMII without crystal.
> Add analog gpio pin configuration ("sleep") to manage power mode on
> stm32mp13.
> 
> Signed-off-by: Christophe Roullier <christophe.roullier at foss.st.com>

Reviewed-by: Marek Vasut <marex at denx.de>