[PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type

[Guenter Roeck]

On 6/5/24 10:59, Joy Chakraborty wrote:
> Change nvmem read/write function definition return type to ssize_t.
> 
> Signed-off-by: Joy Chakraborty <joychakr at google.com>
> ---
>   drivers/hwmon/pmbus/adm1266.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
> index 2c4d94cc8729..7eaab5a7b04c 100644
> --- a/drivers/hwmon/pmbus/adm1266.c
> +++ b/drivers/hwmon/pmbus/adm1266.c
> @@ -375,7 +375,7 @@ static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff)
>   	return 0;
>   }
>   
> -static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val, size_t bytes)
> +static ssize_t adm1266_nvmem_read(void *priv, unsigned int offset, void *val, size_t bytes)
>   {
>   	struct adm1266_data *data = priv;
>   	int ret;
> @@ -395,7 +395,7 @@ static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val, size_t
>   
>   	memcpy(val, data->dev_mem + offset, bytes);
>   
> -	return 0;
> +	return bytes;
>   }
>   
>   static int adm1266_config_nvmem(struct adm1266_data *data)

The series doesn't explain what a driver is supposed to do if it
only transfers part of the data but not all of it due to an error,
or because the request exceeded the size of the media.

For example, this driver still returns an error code if it successfully
transferred some data but not all of it, or if more data was requested
than is available.

I didn't check other drivers, but I would assume that many of them
have the same or a similar problem.

Guenter