[PATCH v6 4/5] wifi: brcmfmac: Add optional lpo clock enable support

[Alexey Charkov]

Hi Jacobe,


On 31/07/2024 9:11 am, Jacobe Zang wrote:
 > WiFi modules often require 32kHz clock to function. Add support to
 > enable the clock to PCIe driver and move "brcm,bcm4329-fmac" check
 > to the top of brcmf_of_probe
 >
 > Co-developed-by: Ondrej Jirman <megi at xff.cz>
 > Signed-off-by: Ondrej Jirman <megi at xff.cz>
 > Signed-off-by: Jacobe Zang <jacobe.zang at wesion.com>
 > ---
 >  .../net/wireless/broadcom/brcm80211/brcmfmac/of.c    | 12 +++++++++++-
 >  1 file changed, 11 insertions(+), 1 deletion(-)
 >
 > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c 
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
 > index e406e11481a62..7e0a2ad5c7c8a 100644
 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
 > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
 > @@ -6,6 +6,7 @@
 >  #include <linux/of.h>
 >  #include <linux/of_irq.h>
 >  #include <linux/of_net.h>
 > +#include <linux/clk.h>
 >
 >  #include <defs.h>
 >  #include "debug.h"
 > @@ -70,12 +71,16 @@ void brcmf_of_probe(struct device *dev, enum 
brcmf_bus_type bus_type,
 >  {
 >      struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
 >      struct device_node *root, *np = dev->of_node;
 > +    struct clk *clk;
 >      const char *prop;
 >      int irq;
 >      int err;
 >      u32 irqf;
 >      u32 val;
 >
 > +    if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
 > +        return;

Did you test this? The DTS patch you sent as part of this series doesn't 
list "brcm,bcm4329-fmac" in the compatible, so this will probably return 
right here, skipping over the rest of your patch.

Please test before resending, both with and without the driver for the 
Bluetooth part of the chip (since it also touches clocks).

You are also changing the behavior for other systems by putting this 
check further up the probe path, which might break things for no reason. 
Better put your clk-related addition below where this check was 
originally, rather than reorder stuff you don't have to reorder.

 > +
 >      /* Apple ARM64 platforms have their own idea of board type, 
passed in
 >       * via the device tree. They also have an antenna SKU parameter
 >       */
 > @@ -113,8 +118,13 @@ void brcmf_of_probe(struct device *dev, enum 
brcmf_bus_type bus_type,
 >          of_node_put(root);
 >      }
 >
 > -    if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
 > +    clk = devm_clk_get_optional_enabled(dev, "lpo");
 > +    if (!IS_ERR_OR_NULL(clk)) {
 > +        brcmf_dbg(INFO, "enabling 32kHz clock\n");
 > +        clk_set_rate(clk, 32768);
 > +    } else {
 >          return;

Why return here? If the clock is optional, a lot of systems will not 
have it - that shouldn't prevent the driver from probing. And you are 
still not handling the -EPROBE_DEFER case which was mentioned on your 
previous submission.

Best regards,
Alexey