[PATCH 7/7] arm64: dts: broadcom: bcm2712: Add UARTA controller node.

[Ivan T. Ivanov]

On RPi5 device Bluetooth chips is connected to UARTA
port. Add Bluetooth chips and related pin definitions.
With this and firmware already provided by distributions,
at least on openSUSE Tumbleweed, this is sufficient to make
Bluetooth operational on RPi5 \o/.

Signed-off-by: Ivan T. Ivanov <iivanov at suse.de>
---
 .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     | 45 +++++++++++++++++++
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi     | 11 +++++
 2 files changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index b6bfe0abb774..a557cbd8ba17 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -133,11 +133,39 @@ wl_on_pins: wl-on-pins {
 		pins = "gpio28";
 	};
 
+	bt_shutdown_pins: bt-shutdown-pins {
+		function = "gpio";
+		pins = "gpio29";
+	};
+
 	emmc_sd_pulls: emmc-sd-pulls {
 		pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
 		bias-pull-up;
 	};
 
+	uarta_24_pins: uarta-24-pins {
+		pin-rts {
+			function = "uart0";
+			pins = "gpio24";
+			bias-disable;
+		};
+		pin-cts {
+			function = "uart0";
+			pins = "gpio25";
+			bias-pull-up;
+		};
+		pin-txd {
+			function = "uart0";
+			pins = "gpio26";
+			bias-disable;
+		};
+		pin-rxd {
+			function = "uart0";
+			pins = "gpio27";
+			bias-pull-up;
+		};
+	};
+
 	sdio2_30_pins: sdio2-30-pins {
 		pin-clk {
 			function = "sd2";
@@ -156,3 +184,20 @@ pins-dat {
 		};
 	};
 };
+
+/* uarta communicates with the BT module */
+&uarta {
+	uart-has-rtscts;
+	auto-flow-control;
+	status = "okay";
+	clock-frequency = <96000000>;
+	pinctrl-0 = <&uarta_24_pins &bt_shutdown_pins>;
+	pinctrl-names = "default";
+
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+		local-bd-address = [ 00 00 00 00 00 00 ];
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 3c0663dc6712..e972f94d6828 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -305,6 +305,17 @@ gio: gpio at 7d508500 {
 			brcm,gpio-direct;
 		};
 
+		uarta: serial at 7d50c000 {
+			compatible = "brcm,bcm7271-uart";
+			reg = <0x7d50c000 0x20>;
+			reg-names = "uart";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			skip-init;
+			status = "disabled";
+		};
+
 		pinctrl_aon: pinctrl at 7d510700 {
 			compatible = "brcm,bcm2712-aon-pinctrl";
 			reg = <0x7d510700 0x20>;
-- 
2.43.0