[PATCH v5 4/5] wifi: brcmfmac: Add optional lpo clock enable support

[Jacobe Zang]

>> WiFi modules often require 32kHz clock to function. Add support to
>> enable the clock to PCIe driver.
>>
>> Co-developed-by: Ondrej Jirman <megi at xff.cz>
>> Signed-off-by: Ondrej Jirman <megi at xff.cz>
>> Signed-off-by: Jacobe Zang <jacobe.zang at wesion.com>
>> ---
>>   drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
>> index e406e11481a62..6246e3fd7399f 100644
>> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
>> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
>> @@ -6,6 +6,7 @@
>>   #include <linux/of.h>
>>   #include <linux/of_irq.h>
>>   #include <linux/of_net.h>
>> +#include <linux/clk.h>
>>  
>>   #include <defs.h>
>>   #include "debug.h"
>> @@ -70,6 +71,7 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
>>   {
>>        struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
>>        struct device_node *root, *np = dev->of_node;
>> +     struct clk *clk;
>>        const char *prop;
>>        int irq;
>>        int err;
>> @@ -113,6 +115,12 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
>>                of_node_put(root);
>>        }
>>  
>> +     clk = devm_clk_get_optional_enabled(dev, "lpo");
>> +     if (!IS_ERR_OR_NULL(clk)) {
>> +             brcmf_dbg(INFO, "enabling 32kHz clock\n");
>> +             clk_set_rate(clk, 32768);
>> +     }
>> +
>>        if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
>>                return;
>
> This if-statement should be the first check in brcmf_of_probe(). Can you
> include that change in your patch.

Sure. I will change it ;-)


---
Best Regards
Jacobe