[PATCH v4 1/1] watchdog: imx7ulp_wdt: move post_rcs_wait into struct imx_wdt_hw_feature
Guenter Roeck
linux at roeck-us.net
Mon Jul 29 14:51:13 PDT 2024
On 7/29/24 14:16, Frank Li wrote:
> On Mon, Jul 29, 2024 at 11:12:13PM +0200, Christophe JAILLET wrote:
>> Le 29/07/2024 à 22:06, Frank Li a écrit :
>>> Move post_rcs_wait into struct imx_wdt_hw_feature to simple code logic for
>>> difference compatible string.
>>>
>>> i.MX93 watchdog needn't wait 2.5 clocks after RCS is done. So needn't set
>>> post_rcs_wait.
>>>
>>> Reviewed-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ at public.gmane.org>
>>> Signed-off-by: Alice Guo <alice.guo-3arQi8VN3Tc at public.gmane.org>
>>> Reviewed-by: Ye Li <ye.li-3arQi8VN3Tc at public.gmane.org>
>>> Signed-off-by: Frank Li <Frank.Li-3arQi8VN3Tc at public.gmane.org>
>>> ---
>>> Chagne from v3 to v4:
>>> - Go back to v2 according to Guenter's feedback
>>> Change from v2 to v3:
>>> - Set post_rcs_wait to false explicitly to maintain code consistency
>>> - Add Guenter review tag.
>>> Change from v1 to v2:
>>> - Combine to one patch
>>> ---
>>> drivers/watchdog/imx7ulp_wdt.c | 21 +++++++++------------
>>> 1 file changed, 9 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
>>> index 94914a22daff7..3a75a6f98f8f0 100644
>>> --- a/drivers/watchdog/imx7ulp_wdt.c
>>> +++ b/drivers/watchdog/imx7ulp_wdt.c
>>> @@ -55,6 +55,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>>> struct imx_wdt_hw_feature {
>>> bool prescaler_enable;
>>> + bool post_rcs_wait;
>>> u32 wdog_clock_rate;
>>> };
>>> @@ -62,7 +63,6 @@ struct imx7ulp_wdt_device {
>>> struct watchdog_device wdd;
>>> void __iomem *base;
>>> struct clk *clk;
>>> - bool post_rcs_wait;
>>> bool ext_reset;
>>> const struct imx_wdt_hw_feature *hw;
>>> };
>>> @@ -95,7 +95,7 @@ static int imx7ulp_wdt_wait_rcs(struct imx7ulp_wdt_device *wdt)
>>> ret = -ETIMEDOUT;
>>> /* Wait 2.5 clocks after RCS done */
>>> - if (wdt->post_rcs_wait)
>>> + if (wdt->hw->post_rcs_wait)
>>> usleep_range(wait_min, wait_min + 2000);
>>> return ret;
>>> @@ -334,15 +334,6 @@ static int imx7ulp_wdt_probe(struct platform_device *pdev)
>>> /* The WDOG may need to do external reset through dedicated pin */
>>> imx7ulp_wdt->ext_reset = of_property_read_bool(dev->of_node, "fsl,ext-reset-output");
>>> - imx7ulp_wdt->post_rcs_wait = true;
>>> - if (of_device_is_compatible(dev->of_node,
>>> - "fsl,imx8ulp-wdt")) {
>>> - dev_info(dev, "imx8ulp wdt probe\n");
>>> - imx7ulp_wdt->post_rcs_wait = false;
>>> - } else {
>>> - dev_info(dev, "imx7ulp wdt probe\n");
>>> - }
>>> -
>>> wdog = &imx7ulp_wdt->wdd;
>>> wdog->info = &imx7ulp_wdt_info;
>>> wdog->ops = &imx7ulp_wdt_ops;
>>> @@ -403,6 +394,12 @@ static const struct dev_pm_ops imx7ulp_wdt_pm_ops = {
>>> static const struct imx_wdt_hw_feature imx7ulp_wdt_hw = {
>>> .prescaler_enable = false,
>>> .wdog_clock_rate = 1000,
>>> + .post_rcs_wait = true,
>>> +};
>>> +
>>> +static const struct imx_wdt_hw_feature imx8ulp_wdt_hw = {
>>> + .prescaler_enable = false,
>>> + .wdog_clock_rate = 1000,
>>> };
>>> static const struct imx_wdt_hw_feature imx93_wdt_hw = {
>>> @@ -411,7 +408,7 @@ static const struct imx_wdt_hw_feature imx93_wdt_hw = {
>>> };
>>> static const struct of_device_id imx7ulp_wdt_dt_ids[] = {
>>> - { .compatible = "fsl,imx8ulp-wdt", .data = &imx7ulp_wdt_hw, },
>>> + { .compatible = "fsl,imx8ulp-wdt", .data = &imx8ulp_wdt_hw, },
>>
>> Nitpick: while touching something here, should imx8ulp be after imx7ulp?
>
> Yes, it should be better.
>
> Guenter: do you think it is okay to move it after 7ulp?
>
Sure
Guenter
> Frank
>
>>
>> CJ
>>
>>> { .compatible = "fsl,imx7ulp-wdt", .data = &imx7ulp_wdt_hw, },
>>> { .compatible = "fsl,imx93-wdt", .data = &imx93_wdt_hw, },
>>> { /* sentinel */ }
>>
More information about the linux-arm-kernel
mailing list