[PATCH v2 5/6] ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec

[Artur Weber]

This was initially copied from the Midas DTSI, but there is no
proof that the same interrupt is also used on the Tab 3. The pin
listed as the interrupt here is GPIO_HDMI_CEC on the Midas,
but for the Tab 3 it is the headset button GPIO - GPIO_EAR_SEND_END.

Drop the interrupt, since there is no proof that it is used.

Signed-off-by: Artur Weber <aweber.kernel at gmail.com>
---
 arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index 5106bb752b7d..70e3091062f9 100644
--- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -540,8 +540,6 @@ wm1811: audio-codec at 1a {
 		clock-names = "MCLK1", "MCLK2";
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
 
 		gpio-controller;
 		#gpio-cells = <2>;

-- 
2.45.2