[PATCH 11/14] arm64: dts: freescale: imx93-tqma9352-mba93xxca: add RTC / temp sensor IRQ

[Alexander Stein]

From: Markus Niebel <Markus.Niebel at ew.tq-group.com>

The IRQ lines from devices on SoM are connected to CPU GPIO on
this mainboard.

Signed-off-by: Markus Niebel <Markus.Niebel at ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 .../dts/freescale/imx93-tqma9352-mba93xxca.dts   | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 99a0b6b9e304..2d979ab085ee 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -500,6 +500,22 @@ &lpuart8 {
 	status = "okay";
 };
 
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_temp_sensor_som>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &tpm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tpm5>;
-- 
2.34.1