[PATCH v7 0/3] hwrng: add hwrng support for Rockchip RK3568
Diederik de Haas
didi.debian at cknow.org
Mon Jul 22 12:03:52 PDT 2024
On Monday, 22 July 2024 19:57:05 CEST Chen-Yu Tsai wrote:
> On Wed, Jul 17, 2024 at 12:54 AM Diederik de Haas <didi.debian at cknow.org>
wrote:
> > On Tuesday, 16 July 2024 17:18:48 CEST Chen-Yu Tsai wrote:
> > > On Jul 16, 2024 at 10:13 PM Diederik de Haas <didi.debian at cknow.org>
wrote:
> > > > On Tuesday, 16 July 2024 15:59:40 CEST Diederik de Haas wrote:
> > > > > For shits and giggles, I tried it on my PineTab2 too (also rk3566):
> > > > >
> > > > > ===========================================================
> > > > > root at pinetab2:~# uname -a
> > > > > Linux pinetab2 6.10+unreleased-arm64 #1 SMP Debian 6.10-1~cknow
> > > > > (2024-04-24) aarch64 GNU/Linux
> > > > >
> > > > > root at pinetab2:~# dd if=/dev/hwrng bs=100000 count=1 > /dev/null
> > > > > 1+0 records in
> > > > > 1+0 records out
> > > > > 100000 bytes (100 kB, 98 KiB) copied, 5,69533 s, 17,6 kB/s
> > > > >
> > > > > root at plebian-pinetab2:~# cat /dev/hwrng | rngtest -c 1000
> > > > > rngtest 5
> > > > > ...
> > > > > rngtest: starting FIPS tests...
> > > > > rngtest: bits received from input: 20000032
> > > > > rngtest: FIPS 140-2 successes: 730
> > > > > rngtest: FIPS 140-2 failures: 270
> > > > > ===========================================================
> > > > >
> > > > > That's looking quite a lot better ... and I have no idea why.
> > > > >
> > > > > The Q64-A is used as headless server and the PineTab2 is not,
> > > > > but I connected to both over SSH and they were freshly booted
> > > > > into, thus I haven't actually/normally used the PT2 since boot.
> > > >
> > > > I did freshly install rng-tools5 package before running the test, so
> > > > I rebooted again to make sure that wasn't a factor:
> > > >
> > > > ===========================================================
> > > > root at pinetab2:~# cat /dev/hwrng | rngtest -c 1000
> > > > rngtest 5
> > > > ...
> > > > rngtest: starting FIPS tests...
> > > > rngtest: bits received from input: 20000032
> > > > rngtest: FIPS 140-2 successes: 704
> > > > rngtest: FIPS 140-2 failures: 296
> > > > ===========================================================
> > > >
> > > > So that 704/296 vs 730/270 in the previous run on the PT2.
> > > >
> > > On my Rock 3A:
> > >
> > > wens at rock-3a:~$ sudo cat /dev/hwrng | rngtest -c 1000
> > > rngtest 5
> > > ...
> > > rngtest: starting FIPS tests...
> > > rngtest: bits received from input: 20000032
> > > rngtest: FIPS 140-2 successes: 992
> > > rngtest: FIPS 140-2 failures: 8
> > >
> > > wens at rock-3a:~$ uname -a
> > > Linux rock-3a 6.10.0-rc7-next-20240712-12899-g7df602fe7c8b #9 SMP Mon
> > > Jul 15 00:39:32 CST 2024 aarch64 GNU/Linux
> >
> > I wondered if ``dd if=/dev/hwrng bs=100000 count=1 > /dev/null`` before
> > the actual test run made a difference.
> > Tried it on my Quartz64 Model A: no
> >
> > Then I tried it on my Quartz64 Model B:
> >
> > root at quartz64b:~# cat /dev/hwrng | rngtest -c 1000
> > rngtest 5
> > ...
> > rngtest: starting FIPS tests...
> > rngtest: bits received from input: 20000032
> > rngtest: FIPS 140-2 successes: 120
> > rngtest: FIPS 140-2 failures: 880
> >
> > root at quartz64b:~# dd if=/dev/hwrng bs=100000 count=1 > /dev/null
> > 1+0 records in
> > 1+0 records out
> > 100000 bytes (100 kB, 98 KiB) copied, 5.71466 s, 17.5 kB/s
> >
> > root at quartz64b:~# cat /dev/hwrng | rngtest -c 1000
> > rngtest 5
> > ...
> > rngtest: starting FIPS tests...
> > rngtest: bits received from input: 20000032
> > rngtest: FIPS 140-2 successes: 104
> > rngtest: FIPS 140-2 failures: 896
> >
> > root at quartz64b:~# uname -a
> > Linux quartz64b 6.10+unreleased-arm64 #1 SMP Debian 6.10-1~cknow
> > (2024-04-24) aarch64 GNU/Linux>
> > :-O
>
> I pulled out my Quartz64 model B, and the results seem better than yours.
>
> root at quartz64:~# sudo dd if=/dev/hwrng bs=256 | rngtest -c 1000
> rngtest 5
> ...
> rngtest: starting FIPS tests...
> rngtest: bits received from input: 20000032
> rngtest: FIPS 140-2 successes: 859
> rngtest: FIPS 140-2 failures: 141
> root at quartz64:~# sudo dd if=/dev/hwrng bs=256 | rngtest -c 1000
> rngtest 5
> ...
> rngtest: starting FIPS tests...
> rngtest: bits received from input: 20000032
> rngtest: FIPS 140-2 successes: 843
> rngtest: FIPS 140-2 failures: 157
I noticed you used ``dd`` instead of ``cat``, so I tried again ...
Quartz64-A:
root at quartz64a:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
rngtest 5
...
rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 411
rngtest: FIPS 140-2 failures: 589
root at quartz64a:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 391
rngtest: FIPS 140-2 failures: 609
root at quartz64a:~# dd if=/dev/hwrng bs=100000 count=1 > /dev/null
1+0 records in
1+0 records out
100000 bytes (100 kB, 98 KiB) copied, 5.66202 s, 17.7 kB/s
root at quartz64a:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 386
rngtest: FIPS 140-2 failures: 614
root at quartz64a:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 356
rngtest: FIPS 140-2 failures: 644
Quartz64-B:
root at quartz64b:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 118
rngtest: FIPS 140-2 failures: 882
root at quartz64b:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 133
rngtest: FIPS 140-2 failures: 867
root at quartz64b:~# dd if=/dev/hwrng bs=100000 count=1 > /dev/null
root at quartz64b:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 97
rngtest: FIPS 140-2 failures: 903
root at quartz64b:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 130
rngtest: FIPS 140-2 failures: 870
And lastly on PineTab2:
root at pinetab2:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 705
rngtest: FIPS 140-2 failures: 295
root at pinetab2:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 678
rngtest: FIPS 140-2 failures: 322
root at pinetab2:~# dd if=/dev/hwrng bs=100000 count=1 > /dev/null
root at pinetab2:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 681
rngtest: FIPS 140-2 failures: 319
root at pinetab2:~# dd if=/dev/hwrng bs=256 | rngtest -c 1000
...
rngtest: FIPS 140-2 successes: 669
rngtest: FIPS 140-2 failures: 331
So my Q64-B tests are consistently MUCH worse then your Q64-B tests ...
This seems BAD to me, now that we even have completely different results per
device of the EXACT same model?!? Hardware revision may be different (I have a
v1.4), but it seems rather pointless to go into that direction.
It then also seems rather pointless to try it with different parameters if the
results on the same SBC model can vary this much.
Thanks for your tests,
Diederik
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240722/0a80ce2a/attachment.sig>
More information about the linux-arm-kernel
mailing list