[RFC PATCH 3/3] ARM: dts: davinci, keystone: correct watchdog nodenames

[Kousik Sanagavarapu]

Using "wdt" instead of "watchdog" for watchdog timer nodes doesn't allow
for validation with the corresponding dtschema and gives errors

	$ make CHECK_DTBS=y DT_SCHEMA_FILES=ti,davinci-wdt.yaml \
		ti/keystone/keystone-k2g-ice.dtb

	DTC_CHK arch/arm/boot/dts/ti/keystone/keystone-k2g-ice.dtb
	arch/arm/boot/dts/ti/keystone/keystone-k2g-ice.dtb:
	wdt at 02250000: $nodename:0: 'wdt at 02250000' does not match
	'^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$'
	from schema $id:
	http://devicetree.org/schemas/watchdog/ti,davinci-wdt.yaml#

Therefore change "wdt@" to "watchdog@".

While at it, remove "ti,davinci-wdt" compatible from the keystone dts
code.

Signed-off-by: Kousik Sanagavarapu <five231003 at gmail.com>
---
Question: Should "wdt@" be changed everywhere in the dts code or is it
only a requirement of validation against dtschema?

Also, I'm not sure about removing "ti,davinci-wdt" from the keystone dts
code.  I'm thinking it is only there so that the driver code can get
information from keystone nodes too, because it seems that there is no
code for ti,keystone-wdt.

So question,

- Is WDT Controller driver for keystone not written yet?

Or

- Does the WDT Controller driver for keystone have the same
  functionality as one on davinci - hence leading us to simply do

	.compatible = "ti,keystone-wdt"

  ?

 arch/arm/boot/dts/ti/davinci/da850.dtsi         | 2 +-
 arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi | 4 ++--
 arch/arm/boot/dts/ti/keystone/keystone.dtsi     | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/ti/davinci/da850.dtsi b/arch/arm/boot/dts/ti/davinci/da850.dtsi
index 1d3fb5397ce3..89055ab87256 100644
--- a/arch/arm/boot/dts/ti/davinci/da850.dtsi
+++ b/arch/arm/boot/dts/ti/davinci/da850.dtsi
@@ -525,7 +525,7 @@ clocksource: timer at 20000 {
 			interrupt-names = "tint12", "tint34";
 			clocks = <&pll0_auxclk>;
 		};
-		wdt: wdt at 21000 {
+		wdt: watchdog at 21000 {
 			compatible = "ti,davinci-wdt";
 			reg = <0x21000 0x1000>;
 			clocks = <&pll0_auxclk>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi
index dafe485dfe19..884402a5fe4a 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi
@@ -610,8 +610,8 @@ spi3: spi at 21806000 {
 			clocks = <&k2g_clks 0x0013 0>;
 		};
 
-		wdt: wdt at 02250000 {
-			compatible = "ti,keystone-wdt", "ti,davinci-wdt";
+		wdt: watchdog at 02250000 {
+			compatible = "ti,keystone-wdt";
 			reg = <0x02250000 0x80>;
 			power-domains = <&k2g_pds 0x22>;
 			clocks = <&k2g_clks 0x22 0>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone.dtsi b/arch/arm/boot/dts/ti/keystone/keystone.dtsi
index ff16428860a9..f697f27edcfc 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone.dtsi
@@ -225,8 +225,8 @@ usb0: usb at 2690000 {
 			};
 		};
 
-		wdt: wdt at 22f0080 {
-			compatible = "ti,keystone-wdt","ti,davinci-wdt";
+		wdt: watchdog at 22f0080 {
+			compatible = "ti,keystone-wdt";
 			reg = <0x022f0080 0x80>;
 			clocks = <&clkwdtimer0>;
 		};
-- 
2.45.2.827.g557ae147e6.dirty