[PATCH RFC v2 2/4] arm: dts: marvell: armada-38x: add description for usb phys

[Josua Mayer]

Armada 38x has 3x USB-2.0 utmi phys. They are almost identical to the 2x
utmi phys on armada 8k.

Add descriptions for all 3 phy ports.

Signed-off-by: Josua Mayer <josua at solid-run.com>
---
 arch/arm/boot/dts/marvell/armada-38x.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/marvell/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi
index 446861b6b17b..701a1c0c19ad 100644
--- a/arch/arm/boot/dts/marvell/armada-38x.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi
@@ -392,6 +392,11 @@ comphy5: phy at 5 {
 				};
 			};
 
+			syscon0: system-controller at 18400 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x18420 0x30>;
+			};
+
 			coreclk: mvebu-sar at 18600 {
 				compatible = "marvell,armada-380-core-clock";
 				reg = <0x18600 0x04>;
@@ -580,6 +585,30 @@ ahci0: sata at a8000 {
 				status = "disabled";
 			};
 
+			utmi: utmi at c0000 {
+				compatible = "marvell,a38x-utmi-phy";
+				reg = <0xc0000 0x6000>, <0x18420 4>, <0x18440 12>;
+				reg-names = "utmi", "usb-cfg", "utmi-cfg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+
+				utmi0: usb-phy at 0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				utmi1: usb-phy at 1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				utmi2: usb-phy at 2 {
+					reg = <2>;
+					#phy-cells = <0>;
+				};
+			};
+
 			bm: bm at c8000 {
 				compatible = "marvell,armada-380-neta-bm";
 				reg = <0xc8000 0xac>;

-- 
2.35.3