[PATCH 2/2] arm64: dts: rockchip: Add support for rk3588 GenBook
Andy Yan
andyshrk at 163.com
Tue Jul 16 03:07:57 PDT 2024
Hello Dragan,
在 2024-07-15 22:47:04，"Dragan Simic" <dsimic at manjaro.org> 写道：
>Hello Andy,
>
>On 2024-07-15 12:44, Andy Yan wrote:
>> At 2024-07-14 23:27:54, "Dragan Simic" <dsimic at manjaro.org> wrote:
>>> Please see a few comments below.
>>>
>>> On 2024-07-14 13:28, Andy Yan wrote:
>>>> Cool Pi GenBook works as a mother board connect with CM5 [0].
>>>
>>> s/mother board/carrier board/
>>
>> This can be changed to carrier board in next version。
>>
>>> s/CM5/GenM5/
>>
>> In fact, the SOM is called CM5 always[0]， even this laptop was
>> called cm5 laptop from the
>> very beginning of the design。
>> They just gave it a new name GenBook when it comes to crowdsupply.
>>
>> The dtsi for CM5 is aready landing upstream，I inclulde it in the
>> current genbook dts。
>>
>> [0]https://forum.cool-pi.com/topic/98/cool-pi-5-compute-module-minipc-carrier-board-spec
>
>Ah, that's quite interesting, it was probably renamed for marketing
>purposes. Thanks for the clarification.
>
>To add to the confusion, none of "GenBook", "CM5" or "GenM5" appear
>on the labels found on the actual PCBs. [1] Instead, there are only
>some rather generic terms.
So we can keep the name as it is now ？
>
>[1]
>https://www.crowdsupply.com/img/6185/60c35852-7a58-4b6f-80fc-af3a0e3d6185/genbook-rk3588-main-board-close-up_jpg_gallery-lg.jpg
>
>>>> Specification:
>>>> - Rockchip RK3588
>>>> - LPDDR5X 8/32 GB
>>>> - eMMC 64 GB
>>>> - HDMI Type A out x 1
>>>> - USB 3.0 Host x 1
>>>> - USB-C 3.0 with DisplayPort AltMode
>>>> - PCIE M.2 E Key for RTL8852BE Wireless connection
>>>> - PCIE M.2 M Key for NVME connection
>>>> - eDP panel with 1920x1080
>>>>
>>>> This patch add basic support to bringup eMMC/USB HOST/WiFi
>>>> and can also drive a HDMI output with out of tree hdmi patches.
>>>>
>>>> [0]
>>>> https://www.crowdsupply.com/shenzhen-tianmao-technology-co-ltd/genbook-rk3588
>>>>
>>>> Signed-off-by: Andy Yan <andyshrk at 163.com>
>>>> ---
>>>>
>>>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>>>> .../dts/rockchip/rk3588-coolpi-genbook.dts | 296
>>>> ++++++++++++++++++
>>>> 2 files changed, 297 insertions(+)
>>>> create mode 100644
>>>> arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>
>>> It would be better to split this into two files: a dtsi for the GenM5
>>> system
>>> on module, and a dts for the GenBook carrier board. That way, the
>>> dts(i) files
>>> would describe the actual hardware better.
>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile
>>>> b/arch/arm64/boot/dts/rockchip/Makefile
>>>> index 8fa469db400c..0fad54939bbd 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>>>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>>>> @@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) +=
>>>> rk3568-wolfvision-pf5-display-vz.dtbo
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) +=
>>>> rk3568-wolfvision-pf5-io-expander.dtbo
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
>>>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-genbook.dtb
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>> b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>> new file mode 100644
>>>> index 000000000000..28357c6f05fb
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>> @@ -0,0 +1,296 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>> +/*
>>>> + * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
>>>> + *
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include <dt-bindings/leds/common.h>
>>>> +#include "rk3588-coolpi-cm5.dtsi"
>>>> +
>>>> +/ {
>>>> + model = "RK3588 CoolPi GenBook";
>>>> + compatible = "coolpi,genbook", "coolpi,pi-cm5", "rockchip,rk3588";
>>>> +
>>>> + backlight: backlight {
>>>> + compatible = "pwm-backlight";
>>>> + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&bl_en>;
>>>> + power-supply = <&vcc12v_dcin>;
>>>> + pwms = <&pwm6 0 25000 0>;
>>>> + };
>>>> +
>>>> + leds: leds {
>>>> + compatible = "gpio-leds";
>>>> +
>>>> + heartbeat_led: led-0 {
>>>> + color = <LED_COLOR_ID_GREEN>;
>>>> + function = LED_FUNCTION_STATUS;
>>>> + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
>>>> + linux,default-trigger = "heartbeat";
>>>> + };
>>>> +
>>>> + wlan_led: led-1 {
>>>> + color = <LED_COLOR_ID_GREEN>;
>>>> + function = LED_FUNCTION_WLAN;
>>>> + gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
>>>> + };
>>>> +
>>>> + charging_red: led-2 {
>>>> + function = LED_FUNCTION_CHARGING;
>>>> + color = <LED_COLOR_ID_RED>;
>>>> + gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
>>>> + };
>>>> + };
>>>> +
>>>> + vcc12v_dcin: vcc12v-dcin-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vcc12v_dcin";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <12000000>;
>>>> + regulator-max-microvolt = <12000000>;
>>>> + };
>>>> +
>>>> + vcc_sys: vcc-sys-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vcc_sys";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <7000000>;
>>>> + regulator-max-microvolt = <7000000>;
>>>> + vin-supply = <&vcc12v_dcin>;
>>>> + };
>>>> +
>>>> + vcc5v0_sys: vcc5v0-sys-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vcc5v0_sys";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <7000000>;
>>>> + regulator-max-microvolt = <7000000>;
>>>> + vin-supply = <&vcc_sys>;
>>>> + };
>>>> +
>>>> + vcc3v3_sys: vcc3v3-sys-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vcc3v3_sys";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + vin-supply = <&vcc5v0_sys>;
>>>> + };
>>>> +
>>>> + vcc3v3_lcd: vcc3v3-lcd-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vcc3v3_lcd";
>>>> + enable-active-high;
>>>> + gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&lcdpwr_en>;
>>>> + vin-supply = <&vcc3v3_sys>;
>>>> + };
>>>> +
>>>> + vcc5v0_usb: vcc5v0-usb-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vcc5v0_usb";
>>>> + regulator-boot-on;
>>>> + regulator-always-on;
>>>> + enable-active-high;
>>>> + regulator-min-microvolt = <5000000>;
>>>> + regulator-max-microvolt = <5000000>;
>>>> + gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&usb_pwren>;
>>>> + vin-supply = <&vcc_sys>;
>>>> + };
>>>> +
>>>> + vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vcc5v0_host";
>>>> + regulator-boot-on;
>>>> + regulator-always-on;
>>>> + enable-active-high;
>>>> + regulator-min-microvolt = <5000000>;
>>>> + regulator-max-microvolt = <5000000>;
>>>> + gpio = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&usb_host_pwren>;
>>>> + vin-supply = <&vcc5v0_usb>;
>>>> + };
>>>> +};
>>>> +
>>>> +&gmac0 {
>>>> + status = "disabled";
>>>> +};
>>>> +
>>>> +/* M.2 E-Key */
>>>> +&pcie2x1l0 {
>>>> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
>>>> + vpcie3v3-supply = <&vcc3v3_sys>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron
>>>> &bt_pwron>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&pcie2x1l2 {
>>>> + status = "disabled";
>>>> +};
>>>> +
>>>> +&pcie30phy {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +/* M.2 M-Key ssd */
>>>> +&pcie3x4 {
>>>> + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
>>>> + vpcie3v3-supply = <&vcc3v3_sys>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&pinctrl {
>>>> + lcd {
>>>> + lcdpwr_en: lcdpwr-en {
>>>> + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
>>>> + };
>>>> +
>>>> + bl_en: bl-en {
>>>> + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>>>> + };
>>>> + };
>>>> +
>>>> + usb {
>>>> + usb_pwren: usb-pwren {
>>>> + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> +
>>>> + usb_otg_pwren: usb-otg-pwren {
>>>> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> +
>>>> + usb_host_pwren: usb-host-pwren {
>>>> + rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> + };
>>>> +
>>>> + wifi {
>>>> + bt_pwron: bt-pwron {
>>>> + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> +
>>>> + pcie_clkreq: pcie-clkreq {
>>>> + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> +
>>>> + pcie_rst: pcie-rst {
>>>> + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> +
>>>> + wifi_pwron: wifi-pwron {
>>>> + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> +
>>>> + pcie_wake: pcie-wake {
>>>> + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&pwm6 {
>>>> + pinctrl-0 = <&pwm6m1_pins>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&sdmmc {
>>>> + status = "disabled";
>>>> +};
>>>> +
>>>> +&sfc {
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&fspim2_pins>;
>>>> + status = "okay";
>>>> +
>>>> + flash at 0 {
>>>> + compatible = "jedec,spi-nor";
>>>> + reg = <0x0>;
>>>> + spi-max-frequency = <100000000>;
>>>> + spi-rx-bus-width = <4>;
>>>> + spi-tx-bus-width = <1>;
>>>> + };
>>>> +};
>>>> +
>>>> +&u2phy0 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy0_otg {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&usbdp_phy0 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy1 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy1_otg {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy2 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy3 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy2_host {
>>>> + phy-supply = <&vcc5v0_usb_host0>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy3_host {
>>>> + phy-supply = <&vcc5v0_usb>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&usbdp_phy1 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +/* For Keypad */
>>>> +&usb_host0_ehci {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&usb_host0_ohci {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +/* Type C port */
>>>> +&usb_host0_xhci {
>>>> + dr_mode = "peripheral";
>>>> + maximum-speed = "high-speed";
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +/* connected to a HUB for camera and BT */
>>>> +&usb_host1_ehci {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&usb_host1_ohci {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +/* USB A out */
>>>> +&usb_host1_xhci {
>>>> + dr_mode = "host";
>>>> + status = "okay";
>>>> +};
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
More information about the linux-arm-kernel
mailing list