[PATCH v5 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
Amit Singh Tomar
amitsinght at marvell.com
Mon Jul 15 20:20:39 PDT 2024
On 7/15/2024 2:32 PM, Pankaj Gupta wrote:
>> On 7/12/2024 11:49 AM, Pankaj Gupta wrote:
>> > NXP hardware IP(s) for secure-enclaves like Edgelock Enclave(ELE), are
>> > embedded in the SoC to support the features like HSM, SHE & V2X, using
>> > message based communication interface.
>> >
>> > The secure enclave FW communicates on a dedicated messaging unit(MU)
>> > based interface(s) with application core, where kernel is running.
>> > It exists on specific i.MX processors. e.g. i.MX8ULP, i.MX93.
>> >
>> > This patch adds the driver for communication interface to
>> > secure-enclave, for exchanging messages with NXP secure enclave HW
>> > IP(s) like EdgeLock Enclave (ELE) from Kernel-space, used by kernel
>> > management layers like
>> > - DM-Crypt.
>> >
>> > Signed-off-by: Pankaj Gupta <pankaj.gupta at nxp.com>
>> > ---
>> > drivers/firmware/imx/Kconfig | 12 +
>> > drivers/firmware/imx/Makefile | 2 +
>> > drivers/firmware/imx/ele_base_msg.c | 251 ++++++++++++++++++
>> > drivers/firmware/imx/ele_base_msg.h | 93 +++++++
>> > drivers/firmware/imx/ele_common.c | 264 +++++++++++++++++++
>> > drivers/firmware/imx/ele_common.h | 44 ++++
>> > drivers/firmware/imx/se_ctrl.c | 496
>> ++++++++++++++++++++++++++++++++++++
>> > drivers/firmware/imx/se_ctrl.h | 83 ++++++
>> > include/linux/firmware/imx/se_api.h | 14 +
>> > 9 files changed, 1259 insertions(+)
>> >
>> > diff --git a/drivers/firmware/imx/Kconfig
>> > b/drivers/firmware/imx/Kconfig index 183613f82a11..0f6877a24f0b
>> 100644
>> > --- a/drivers/firmware/imx/Kconfig
>> > +++ b/drivers/firmware/imx/Kconfig
>> > @@ -22,3 +22,15 @@ config IMX_SCU
>> >
>> > This driver manages the IPC interface between host CPU and the
>> > SCU firmware running on M4.
>> > +
>> > +config IMX_SEC_ENCLAVE
>> > + tristate "i.MX Embedded Secure Enclave - EdgeLock Enclave Firmware
>> driver."
>> > + depends on IMX_MBOX && ARCH_MXC && ARM64
>> > + default m if ARCH_MXC
>> > +
>> > + help
>> > + It is possible to use APIs exposed by the iMX Secure Enclave HW IP
>> called:
>> > + - EdgeLock Enclave Firmware (for i.MX8ULP, i.MX93),
>> > + like base, HSM, V2X & SHE using the SAB protocol via the shared
>> Messaging
>> > + Unit. This driver exposes these interfaces via a set of file descriptors
>> > + allowing to configure shared memory, send and receive messages.
>> > diff --git a/drivers/firmware/imx/Makefile
>> > b/drivers/firmware/imx/Makefile index 8f9f04a513a8..aa9033e0e9e3
>> > 100644
>> > --- a/drivers/firmware/imx/Makefile
>> > +++ b/drivers/firmware/imx/Makefile
>> > @@ -1,3 +1,5 @@
>> > # SPDX-License-Identifier: GPL-2.0
>> > obj-$(CONFIG_IMX_DSP) += imx-dsp.o
>> > obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o
>> imx-scu-soc.o
>> > +sec_enclave-objs = se_ctrl.o ele_common.o ele_base_msg.o
>> > +obj-${CONFIG_IMX_SEC_ENCLAVE} += sec_enclave.o
>> > diff --git a/drivers/firmware/imx/ele_base_msg.c
>> > b/drivers/firmware/imx/ele_base_msg.c
>> > new file mode 100644
>> > index 000000000000..3b6ddc2c60c2
>> > --- /dev/null
>> > +++ b/drivers/firmware/imx/ele_base_msg.c
>> > @@ -0,0 +1,251 @@
>> > +// SPDX-License-Identifier: GPL-2.0+
>> > +/*
>> > + * Copyright 2024 NXP
>> > + */
>> > +
>> > +#include <linux/types.h>
>> > +
>> nit: Do we need a newline here? If not, please arrange it alphabetically.
>> > +#include <linux/completion.h>
>> > +#include <linux/dma-mapping.h>
>> > +#include <linux/genalloc.h>
>> > +
>> > +#include "ele_base_msg.h"
>> > +#include "ele_common.h"
>> > +
>> > +int ele_get_info(struct device *dev, struct ele_dev_info *s_info) {
>> > + struct se_if_priv *priv = dev_get_drvdata(dev);
>> > + struct se_api_msg *tx_msg __free(kfree) = NULL;
>> > + struct se_api_msg *rx_msg __free(kfree) = NULL;
>> > + dma_addr_t get_info_addr = 0;
>> > + u32 *get_info_data = NULL;
>> > + int ret = 0;
>> > +
>> > + memset(s_info, 0x0, sizeof(*s_info));
>> > +
>> > + if (priv->mem_pool)
>> > + get_info_data = gen_pool_dma_alloc(priv->mem_pool,
>> > + ELE_GET_INFO_BUFF_SZ,
>> > + &get_info_addr);
>> > + else
>> > + get_info_data = dma_alloc_coherent(dev,
>> > + ELE_GET_INFO_BUFF_SZ,
>> > + &get_info_addr,
>> > + GFP_KERNEL);
>> > + if (!get_info_data) {
>> > + ret = -ENOMEM;
>> This isn't really needed, and would've made sense with goto.
>> Just use return -ENOMEM after dev_dbg.
>
> It was the older review comment to change this way.
The previous comment suggested using ret = -ENOMEM; followed by goto
exit;. However, in this case, you can simply return -ENOMEM, which will
save an extra statement.
>
>> > + dev_dbg(dev,
>> > + "%s: Failed to allocate get_info_addr.\n",
>> > + __func__);
>> > + return ret;
>> > + }
>> > +
>> > + tx_msg = kzalloc(ELE_GET_INFO_REQ_MSG_SZ, GFP_KERNEL);
>> > + if (!tx_msg) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > +
>> > + rx_msg = kzalloc(ELE_GET_INFO_RSP_MSG_SZ, GFP_KERNEL);
>> > + if (!rx_msg) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > + priv->rx_msg_sz = ELE_GET_INFO_RSP_MSG_SZ;
>> > +
>> > + ret = se_fill_cmd_msg_hdr(priv,
>> > + (struct se_msg_hdr *)&tx_msg->header,
>> > + ELE_GET_INFO_REQ,
>> > + ELE_GET_INFO_REQ_MSG_SZ,
>> > + true);
>> > + if (ret)
>> > + goto exit;
>> > +
>> > + tx_msg->data[0] = upper_32_bits(get_info_addr);
>> > + tx_msg->data[1] = lower_32_bits(get_info_addr);
>> > + tx_msg->data[2] = sizeof(*s_info);
>> > + ret = ele_msg_send_rcv(priv, tx_msg, rx_msg);
>> > + if (ret < 0)
>> > + goto exit;
>> > +
>> > + ret = se_val_rsp_hdr_n_status(priv,
>> > + &rx_msg->header,
>> > + ELE_GET_INFO_REQ,
>> > + ELE_GET_INFO_RSP_MSG_SZ,
>> > + true);
>> > +
>> > + memcpy(s_info, get_info_data, sizeof(*s_info));
>> > +
>> > +exit:
>> > + if (priv->mem_pool)
>> > + gen_pool_free(priv->mem_pool,
>> > + (u64) get_info_data,
>> > + ELE_GET_INFO_BUFF_SZ);
>> > + else
>> > + dma_free_coherent(dev,
>> > + ELE_GET_INFO_BUFF_SZ,
>> > + get_info_data,
>> > + get_info_addr);
>> > +
>> > + return ret;
>> > +}
>> > +
>> > +int ele_fetch_soc_info(struct device *dev, u16 *soc_rev, u64
>> > +*serial_num) {
>> > + struct ele_dev_info s_info = {0};
>> > + int err = 0;
>> > +
>> > + err = ele_get_info(dev, &s_info);
>> > + if (err < 0) {
>> > + dev_err(dev, "Error");
>> > + return err;
>> > + }
>> > +
>> > + *soc_rev = s_info.d_info.soc_rev;
>> > + *serial_num = GET_SERIAL_NUM_FROM_UID(s_info.d_info.uid,
>> > + MAX_UID_SIZE >> 2);
>> > +
>> > + return err;
>> > +}
>> > +
>> > +int ele_ping(struct device *dev)
>> > +{
>> > + struct se_if_priv *priv = dev_get_drvdata(dev);
>> > + struct se_api_msg *tx_msg __free(kfree) = NULL;
>> > + struct se_api_msg *rx_msg __free(kfree) = NULL;
>> > + int ret = 0;
>> > +
>> > + tx_msg = kzalloc(ELE_PING_REQ_SZ, GFP_KERNEL);
>> > + if (!tx_msg) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > +
>> > + rx_msg = kzalloc(ELE_PING_RSP_SZ, GFP_KERNEL);
>> > + if (!rx_msg) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > + priv->rx_msg_sz = ELE_PING_RSP_SZ;
>> > +
>> > + ret = se_fill_cmd_msg_hdr(priv,
>> > + (struct se_msg_hdr *)&tx_msg->header,
>> > + ELE_PING_REQ, ELE_PING_REQ_SZ, true);
>> > + if (ret) {
>> > + dev_err(dev, "Error: se_fill_cmd_msg_hdr failed.\n");
>> > + goto exit;
>> > + }
>> > +
>> > + ret = ele_msg_send_rcv(priv, tx_msg, rx_msg);
>> > + if (ret)
>> > + goto exit;
>> > +
>> > + ret = se_val_rsp_hdr_n_status(priv,
>> > + &rx_msg->header,
>> > + ELE_PING_REQ,
>> > + ELE_PING_RSP_SZ,
>> > + true);
>> > +exit:
>> > + return ret;
>> > +}
>> > +
>> > +int ele_service_swap(struct device *dev,
>> > + phys_addr_t addr,
>> > + u32 addr_size, u16 flag) {
>> > + struct se_if_priv *priv = dev_get_drvdata(dev);
>> > + struct se_api_msg *tx_msg __free(kfree) = NULL;
>> > + struct se_api_msg *rx_msg __free(kfree) = NULL;
>> > + int ret = 0;
>> > +
>> > + tx_msg = kzalloc(ELE_SERVICE_SWAP_REQ_MSG_SZ, GFP_KERNEL);
>> > + if (!tx_msg) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > +
>> > + rx_msg = kzalloc(ELE_SERVICE_SWAP_RSP_MSG_SZ, GFP_KERNEL);
>> > + if (!rx_msg) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > + priv->rx_msg_sz = ELE_SERVICE_SWAP_RSP_MSG_SZ;
>> > +
>> > + ret = se_fill_cmd_msg_hdr(priv,
>> > + (struct se_msg_hdr *)&tx_msg->header,
>> > + ELE_SERVICE_SWAP_REQ,
>> > + ELE_SERVICE_SWAP_REQ_MSG_SZ, true);
>> > + if (ret)
>> > + goto exit;
>> > +
>> > + tx_msg->data[0] = flag;
>> > + tx_msg->data[1] = addr_size;
>> > + tx_msg->data[2] = ELE_NONE_VAL;
>> > + tx_msg->data[3] = lower_32_bits(addr);
>> > + tx_msg->data[4] = se_add_msg_crc((uint32_t *)&tx_msg[0],
>> > + ELE_SERVICE_SWAP_REQ_MSG_SZ);
>> > + ret = ele_msg_send_rcv(priv, tx_msg, rx_msg);
>> > + if (ret < 0)
>> > + goto exit;
>> > +
>> > + ret = se_val_rsp_hdr_n_status(priv,
>> > + &rx_msg->header,
>> > + ELE_SERVICE_SWAP_REQ,
>> > + ELE_SERVICE_SWAP_RSP_MSG_SZ,
>> > + true);
>> > + if (ret)
>> > + goto exit;
>> > +
>> > + if (flag == ELE_IMEM_EXPORT)
>> > + ret = rx_msg->data[1];
>> > + else
>> > + ret = 0;
>> > +
>> > +exit:
>> > +
>> > + return ret;
>> > +}
>> > +
>> > +int ele_fw_authenticate(struct device *dev, phys_addr_t addr) {
>> > + struct se_if_priv *priv = dev_get_drvdata(dev);
>> > + struct se_api_msg *tx_msg __free(kfree) = NULL;
>> > + struct se_api_msg *rx_msg __free(kfree) = NULL;
>> > + int ret = 0;
>> > +
>> > + tx_msg = kzalloc(ELE_FW_AUTH_REQ_SZ, GFP_KERNEL);
>> > + if (!tx_msg) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > +
>> > + rx_msg = kzalloc(ELE_FW_AUTH_RSP_MSG_SZ, GFP_KERNEL);
>> > + if (!rx_msg) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > + priv->rx_msg_sz = ELE_FW_AUTH_RSP_MSG_SZ;
>> > +
>> > + ret = se_fill_cmd_msg_hdr(priv,
>> > + (struct se_msg_hdr *)&tx_msg->header,
>> > + ELE_FW_AUTH_REQ,
>> > + ELE_FW_AUTH_REQ_SZ,
>> > + true);
>> > + if (ret)
>> > + goto exit;
>> > +
>> > + tx_msg->data[1] = upper_32_bits(addr);
>> > + tx_msg->data[0] = lower_32_bits(addr);
>> > + tx_msg->data[2] = addr;
>> > +
>> > + ret = ele_msg_send_rcv(priv, tx_msg, rx_msg);
>> > + if (ret < 0)
>> > + goto exit;
>> > +
>> > + ret = se_val_rsp_hdr_n_status(priv,
>> > + &rx_msg->header,
>> > + ELE_FW_AUTH_REQ,
>> > + ELE_FW_AUTH_RSP_MSG_SZ,
>> > + true);
>> > +exit:
>> > + return ret;
>> > +}
>> > diff --git a/drivers/firmware/imx/ele_base_msg.h
>> > b/drivers/firmware/imx/ele_base_msg.h
>> > new file mode 100644
>> > index 000000000000..a037205dc03d
>> > --- /dev/null
>> > +++ b/drivers/firmware/imx/ele_base_msg.h
>> > @@ -0,0 +1,93 @@
>> > +/* SPDX-License-Identifier: GPL-2.0+ */
>> > +/*
>> > + * Copyright 2024 NXP
>> > + *
>> > + * Header file for the EdgeLock Enclave Base API(s).
>> > + */
>> > +
>> > +#ifndef ELE_BASE_MSG_H
>> > +#define ELE_BASE_MSG_H
>> > +
>> > +#include <linux/device.h>
>> > +#include <linux/types.h>
>> > +
>> > +#define WORD_SZ 4
>> > +#define ELE_NONE_VAL 0x0
>> > +
>> > +#define ELE_GET_INFO_REQ 0xDA
>> > +#define ELE_GET_INFO_REQ_MSG_SZ 0x10
>> > +#define ELE_GET_INFO_RSP_MSG_SZ 0x08
>> > +
>> > +#define ELE_GET_INFO_BUFF_SZ 0x100
>> > +
>> > +#define DEFAULT_IMX_SOC_VER 0xA000
>> > +#define SOC_VER_MASK 0xFFFF0000
>> > +#define SOC_ID_MASK 0x0000FFFF
>> > +
>> > +#define MAX_UID_SIZE (16)
>> > +#define DEV_GETINFO_ROM_PATCH_SHA_SZ (32)
>> > +#define DEV_GETINFO_FW_SHA_SZ (32)
>> > +#define DEV_GETINFO_OEM_SRKH_SZ (64)
>> > +#define DEV_GETINFO_MIN_VER_MASK 0xFF
>> > +#define DEV_GETINFO_MAJ_VER_MASK 0xFF00
>> > +
>> > +struct dev_info {
>> > + uint8_t cmd;
>> > + uint8_t ver;
>> > + uint16_t length;
>> > + uint16_t soc_id;
>> > + uint16_t soc_rev;
>> > + uint16_t lmda_val;
>> > + uint8_t ssm_state;
>> > + uint8_t dev_atts_api_ver;
>> > + uint8_t uid[MAX_UID_SIZE];
>> > + uint8_t sha_rom_patch[DEV_GETINFO_ROM_PATCH_SHA_SZ];
>> > + uint8_t sha_fw[DEV_GETINFO_FW_SHA_SZ]; };
>> > +
>> > +struct dev_addn_info {
>> > + uint8_t oem_srkh[DEV_GETINFO_OEM_SRKH_SZ];
>> > + uint8_t trng_state;
>> > + uint8_t csal_state;
>> > + uint8_t imem_state;
>> > + uint8_t reserved2;
>> > +};
>> > +
>> > +struct ele_dev_info {
>> > + struct dev_info d_info;
>> > + struct dev_addn_info d_addn_info; };
>> > +
>> > +#define GET_SERIAL_NUM_FROM_UID(x, uid_word_sz) \
>> > + (((u64)(((u32 *)(x))[(uid_word_sz) - 1]) << 32) | ((u32
>> > +*)(x))[0])
>> > +
>> > +#define ELE_DEBUG_DUMP_REQ 0x21
>> > +#define ELE_DEBUG_DUMP_RSP_SZ 0x14
>> > +
>> > +#define ELE_PING_REQ 0x01
>> > +#define ELE_PING_REQ_SZ 0x04
>> > +#define ELE_PING_RSP_SZ 0x08
>> > +
>> > +#define ELE_SERVICE_SWAP_REQ 0xDF
>> > +#define ELE_SERVICE_SWAP_REQ_MSG_SZ 0x18 #define
>> > +ELE_SERVICE_SWAP_RSP_MSG_SZ 0x0C
>> > +#define ELE_IMEM_SIZE 0x10000
>> > +#define ELE_IMEM_STATE_OK 0xCA
>> > +#define ELE_IMEM_STATE_BAD 0xFE
>> > +#define ELE_IMEM_STATE_WORD 0x27
>> > +#define ELE_IMEM_STATE_MASK 0x00ff0000
>> > +#define ELE_IMEM_EXPORT 0x1
>> > +#define ELE_IMEM_IMPORT 0x2
>> > +
>> > +#define ELE_FW_AUTH_REQ 0x02
>> > +#define ELE_FW_AUTH_REQ_SZ 0x10
>> > +#define ELE_FW_AUTH_RSP_MSG_SZ 0x08
>> > +
>> > +int ele_get_info(struct device *dev, struct ele_dev_info *s_info);
>> > +int ele_fetch_soc_info(struct device *dev, u16 *soc_rev, u64
>> > +*serial_num); int ele_ping(struct device *dev); int
>> > +ele_service_swap(struct device *dev,
>> > + phys_addr_t addr,
>> > + u32 addr_size, u16 flag); int
>> > +ele_fw_authenticate(struct device *dev, phys_addr_t addr); #endif
>> > diff --git a/drivers/firmware/imx/ele_common.c
>> > b/drivers/firmware/imx/ele_common.c
>> > new file mode 100644
>> > index 000000000000..b2be32550e9b
>> > --- /dev/null
>> > +++ b/drivers/firmware/imx/ele_common.c
>> > @@ -0,0 +1,264 @@
>> > +// SPDX-License-Identifier: GPL-2.0+
>> > +/*
>> > + * Copyright 2024 NXP
>> > + */
>> > +
>> > +#include "ele_base_msg.h"
>> > +#include "ele_common.h"
>> > +
>> > +u32 se_add_msg_crc(u32 *msg, u32 msg_len) {
>> > + u32 nb_words = msg_len / (u32)sizeof(u32);
>> > + u32 crc = 0;
>> > + u32 i;
>> > +
>> > + for (i = 0; i < nb_words - 1; i++)
>> > + crc ^= *(msg + i);
>> > +
>> > + return crc;
>> > +}
>> > +
>> > +int ele_msg_rcv(struct se_if_priv *priv) {
>> > + u32 wait;
>> > + int err = 0;
>> > +
>> > + lockdep_assert_held(&priv->se_if_cmd_lock);
>> > +
>> > + wait = msecs_to_jiffies(1000);
>> > + if (!wait_for_completion_timeout(&priv->done, wait)) {
>> > + dev_err(priv->dev,
>> > + "Error: wait_for_completion timed out.\n");
>> > + err = -ETIMEDOUT;
>> > + }
>> > +
>> > + return err;
>> > +}
>> > +
>> > +int ele_msg_send(struct se_if_priv *priv, void *tx_msg) {
>> > + struct se_msg_hdr *header;
>> > + int err;
>> > +
>> > + header = tx_msg;
>> > +
>> > + if (header->tag == priv->cmd_tag)
>> > + lockdep_assert_held(&priv->se_if_cmd_lock);
>> > +
>> > + scoped_guard(mutex, &priv->se_if_lock);
>> > +
>> > + err = mbox_send_message(priv->tx_chan, tx_msg);
>> > + if (err < 0) {
>> > + dev_err(priv->dev, "Error: mbox_send_message failure.\n");
>> > + return err;
>> > + }
>> > +
>> > + return err;
>> > +}
>> > +
>> > +/* API used for send/receive blocking call. */ int
>> > +ele_msg_send_rcv(struct se_if_priv *priv, void *tx_msg, void *rx_msg)
>> > +{
>> > + int err;
>> > +
>> > + scoped_guard(mutex, &priv->se_if_cmd_lock);
>> > + if (priv->waiting_rsp_dev) {
>> > + dev_warn(priv->dev,
>> > + "There should be no misc dev-ctx, waiting for resp.\n");
>> > + priv->waiting_rsp_dev = NULL;
>> > + }
>> > + priv->rx_msg = rx_msg;
>> > + err = ele_msg_send(priv, tx_msg);
>> > + if (err < 0)
>> > + goto exit;
>> > +
>> > + err = ele_msg_rcv(priv);
>> > +
>> > +exit:
>> > + return err;
>> > +}
>> > +
>> > +static bool exception_for_size(struct se_if_priv *priv,
>> > + struct se_msg_hdr *header) {
>> > + /* List of API(s) that can be accepte variable length
>> > + * response buffer.
>> > + */
>> > + if (header->command == ELE_DEBUG_DUMP_REQ &&
>> > + header->ver == priv->base_api_ver &&
>> > + header->size >= 0 &&
>> > + header->size <= ELE_DEBUG_DUMP_RSP_SZ)
>> > + return true;
>> > +
>> > + return false;
>> > +}
>> > +
>> > +/*
>> > + * Callback called by mailbox FW, when data is received.
>> > + */
>> > +void se_if_rx_callback(struct mbox_client *mbox_cl, void *msg) {
>> > + struct device *dev = mbox_cl->dev;
>> > + struct se_if_priv *priv;
>> > + struct se_msg_hdr *header;
>> > + u32 rx_msg_sz;
>> > +
>> > + priv = dev_get_drvdata(dev);
>> > +
>> > + /* The function can be called with NULL msg */
>> > + if (!msg) {
>> > + dev_err(dev, "Message is invalid\n");
>> > + return;
>> > + }
>> > +
>> > + header = msg;
>> > + rx_msg_sz = header->size << 2;
>> > +
>> > + if (header->tag == priv->rsp_tag) {
>> > + if (!priv->waiting_rsp_dev) {
>> > + /*
>> > + * Reading the EdgeLock Enclave response
>> > + * to the command, sent by other
>> > + * linux kernel services.
>> > + */
>> > + spin_lock(&priv->lock);
>> > + if (priv->rx_msg_sz != rx_msg_sz &&
>> > + !exception_for_size(priv, header))
>> > + dev_err(dev,
>> > + "Msg(priv) recvd with different sz(%d != %d).\n",
>> > + rx_msg_sz, priv->rx_msg_sz);
>> > + else
>> > + memcpy(priv->rx_msg, msg, rx_msg_sz);
>> > +
>> > + complete(&priv->done);
>> > + spin_unlock(&priv->lock);
>> > + return;
>> > + }
>> > + }
>> > +
>> > + dev_err(dev, "Failed to select a device for message: %.8x\n",
>> > + *((u32 *) header));
>> > +}
>> > +
>> > +int se_val_rsp_hdr_n_status(struct se_if_priv *priv,
>> > + struct se_msg_hdr *header,
>> > + uint8_t msg_id,
>> > + uint8_t sz,
>> > + bool is_base_api) {
>> > + u32 status;
>> > +
>> > + if (header->tag != priv->rsp_tag) {
>> > + dev_err(priv->dev,
>> > + "MSG[0x%x] Hdr: Resp tag mismatch. (0x%x != 0x%x)",
>> > + msg_id, header->tag, priv->rsp_tag);
>> > + return -EINVAL;
>> > + }
>> > +
>> > + if (header->command != msg_id) {
>> > + dev_err(priv->dev,
>> > + "MSG Header: Cmd id mismatch. (0x%x != 0x%x)",
>> > + header->command, msg_id);
>> > + return -EINVAL;
>> > + }
>> > +
>> > + if (header->size != (sz >> 2)) {
>> > + dev_err(priv->dev,
>> > + "MSG[0x%x] Hdr: Cmd size mismatch. (0x%x != 0x%x)",
>> > + msg_id, header->size, (sz >> 2));
>> > + return -EINVAL;
>> > + }
>> > +
>> > + if (is_base_api && (header->ver != priv->base_api_ver)) {
>> > + dev_err(priv->dev,
>> > + "MSG[0x%x] Hdr: Base API Vers mismatch. (0x%x != 0x%x)",
>> > + msg_id, header->ver, priv->base_api_ver);
>> > + return -EINVAL;
>> > + } else if (!is_base_api && header->ver != priv->fw_api_ver) {
>> > + dev_err(priv->dev,
>> > + "MSG[0x%x] Hdr: FW API Vers mismatch. (0x%x != 0x%x)",
>> > + msg_id, header->ver, priv->fw_api_ver);
>> > + return -EINVAL;
>> > + }
>> > +
>> > + status = RES_STATUS(priv->rx_msg->data[0]);
>> > + if (status != priv->success_tag) {
>> > + dev_err(priv->dev, "Command Id[%d], Response Failure = 0x%x",
>> > + header->command, status);
>> > + return -EPERM;
>> > + }
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +int se_save_imem_state(struct se_if_priv *priv) {
>> > + int ret;
>> > +
>> > + /* EXPORT command will save encrypted IMEM to given address,
>> > + * so later in resume, IMEM can be restored from the given
>> > + * address.
>> > + *
>> > + * Size must be at least 64 kB.
>> > + */
>> > + ret = ele_service_swap(priv->dev,
>> > + priv->imem.phyaddr,
>> > + ELE_IMEM_SIZE,
>> > + ELE_IMEM_EXPORT);
>> > + if (ret < 0)
>> > + dev_err(priv->dev, "Failed to export IMEM\n");
>> > + else
>> > + dev_info(priv->dev,
>> > + "Exported %d bytes of encrypted IMEM\n",
>> > + ret);
>> > +
>> > + return ret;
>> > +}
>> > +
>> > +int se_restore_imem_state(struct se_if_priv *priv) {
>> > + struct ele_dev_info s_info;
>> > + int ret;
>> > +
>> > + /* get info from ELE */
>> > + ret = ele_get_info(priv->dev, &s_info);
>> > + if (ret) {
>> > + dev_err(priv->dev, "Failed to get info from ELE.\n");
>> > + return ret;
>> > + }
>> > +
>> > + /* Get IMEM state, if 0xFE then import IMEM */
>> > + if (s_info.d_addn_info.imem_state == ELE_IMEM_STATE_BAD) {
>> > + /* IMPORT command will restore IMEM from the given
>> > + * address, here size is the actual size returned by ELE
>> > + * during the export operation
>> > + */
>> > + ret = ele_service_swap(priv->dev,
>> > + priv->imem.phyaddr,
>> > + priv->imem.size,
>> > + ELE_IMEM_IMPORT);
>> > + if (ret) {
>> > + dev_err(priv->dev, "Failed to import IMEM\n");
>> > + goto exit;
>> > + }
>> > + } else
>> > + goto exit;
>> > +
>> > + /* After importing IMEM, check if IMEM state is equal to 0xCA
>> > + * to ensure IMEM is fully loaded and
>> > + * ELE functionality can be used.
>> > + */
>> > + ret = ele_get_info(priv->dev, &s_info);
>> > + if (ret) {
>> > + dev_err(priv->dev, "Failed to get info from ELE.\n");
>> > + goto exit;
>> > + }
>> > +
>> > + if (s_info.d_addn_info.imem_state == ELE_IMEM_STATE_OK)
>> > + dev_info(priv->dev, "Successfully restored IMEM\n");
>> > + else
>> > + dev_err(priv->dev, "Failed to restore IMEM\n");
>> > +
>> > +exit:
>> > + return ret;
>> > +}
>> > diff --git a/drivers/firmware/imx/ele_common.h
>> > b/drivers/firmware/imx/ele_common.h
>> > new file mode 100644
>> > index 000000000000..5ef775a42ab3
>> > --- /dev/null
>> > +++ b/drivers/firmware/imx/ele_common.h
>> > @@ -0,0 +1,44 @@
>> > +/* SPDX-License-Identifier: GPL-2.0+ */
>> > +/*
>> > + * Copyright 2024 NXP
>> > + */
>> > +
>> > +
>> > +#ifndef __ELE_COMMON_H__
>> > +#define __ELE_COMMON_H__
>> > +
>> > +#include "se_ctrl.h"
>> > +
>> > +#define ELE_SUCCESS_IND 0xD6
>> > +
>> > +#define IMX_ELE_FW_DIR "imx/ele/"
>> > +
>> > +uint32_t se_add_msg_crc(uint32_t *msg, uint32_t msg_len); int
>> > +ele_msg_rcv(struct se_if_priv *priv); int ele_msg_send(struct
>> > +se_if_priv *priv, void *tx_msg); int ele_msg_send_rcv(struct
>> > +se_if_priv *priv, void *tx_msg, void *rx_msg); void
>> > +se_if_rx_callback(struct mbox_client *mbox_cl, void *msg); int
>> > +se_val_rsp_hdr_n_status(struct se_if_priv *priv,
>> > + struct se_msg_hdr *header,
>> > + uint8_t msg_id,
>> > + uint8_t sz,
>> > + bool is_base_api);
>> > +
>> > +/* Fill a command message header with a given command ID and length
>> > +in bytes. */ static inline int se_fill_cmd_msg_hdr(struct se_if_priv *priv,
>> > + struct se_msg_hdr *hdr,
>> > + u8 cmd, u32 len,
>> > + bool is_base_api) {
>> > + hdr->tag = priv->cmd_tag;
>> > + hdr->ver = (is_base_api) ? priv->base_api_ver : priv->fw_api_ver;
>> > + hdr->command = cmd;
>> > + hdr->size = len >> 2;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +int se_save_imem_state(struct se_if_priv *priv); int
>> > +se_restore_imem_state(struct se_if_priv *priv);
>> > +
>> > +#endif /*__ELE_COMMON_H__ */
>> > diff --git a/drivers/firmware/imx/se_ctrl.c
>> > b/drivers/firmware/imx/se_ctrl.c new file mode 100644 index
>> > 000000000000..a844794d2b39
>> > --- /dev/null
>> > +++ b/drivers/firmware/imx/se_ctrl.c
>> > @@ -0,0 +1,496 @@
>> > +// SPDX-License-Identifier: GPL-2.0+
>> > +/*
>> > + * Copyright 2024 NXP
>> > + */
>> > +
>> > +#include <linux/completion.h>
>> > +#include <linux/delay.h>
>> > +#include <linux/dev_printk.h>
>> > +#include <linux/dma-mapping.h>
>> > +#include <linux/errno.h>
>> > +#include <linux/export.h>
>> > +#include <linux/firmware.h>
>> > +#include <linux/firmware/imx/se_api.h> #include <linux/genalloc.h>
>> > +#include <linux/init.h> #include <linux/io.h> #include
>> > +<linux/miscdevice.h> #include <linux/mod_devicetable.h> #include
>> > +<linux/module.h> #include <linux/of_platform.h> #include
>> > +<linux/of_reserved_mem.h> #include <linux/platform_device.h> #include
>> > +<linux/slab.h> #include <linux/string.h> #include <linux/sys_soc.h>
>> > +
>> > +#include "ele_base_msg.h"
>> > +#include "ele_common.h"
>> > +#include "se_ctrl.h"
>> > +
>> > +#define RESERVED_DMA_POOL BIT(0)
>> > +#define MBOX_TX_NAME "tx"
>> > +#define MBOX_RX_NAME "rx"
>> > +
>> > +struct se_if_node_info {
>> > + u8 se_if_id;
>> > + u8 se_if_did;
>> > + u8 max_dev_ctx;
>> > + u8 cmd_tag;
>> > + u8 rsp_tag;
>> > + u8 success_tag;
>> > + u8 base_api_ver;
>> > + u8 fw_api_ver;
>> > + u8 *se_name;
>> > + u8 *pool_name;
>> > + u8 *fw_name_in_rfs;
>> > + bool soc_register;
>> > + bool reserved_dma_ranges;
>> > + bool imem_mgmt;
>> > + int (*se_fetch_soc_info)(struct device *dev, u16 *soc_rev, u64
>> > +*serial_num); };
>> > +
>> > +struct se_if_node_info_list {
>> > + u8 num_mu;
>> > + u16 soc_id;
>> > + struct se_if_node_info info[];
>> > +};
>> > +
>> > +static const struct se_if_node_info_list imx8ulp_info = {
>> > + .num_mu = 1,
>> > + .soc_id = SOC_ID_OF_IMX8ULP,
>> > + .info = {
>> > + {
>> > + .se_if_id = 2,
>> > + .se_if_did = 7,
>> > + .max_dev_ctx = 4,
>> > + .cmd_tag = 0x17,
>> > + .rsp_tag = 0xe1,
>> > + .success_tag = ELE_SUCCESS_IND,
>> > + .base_api_ver = MESSAGING_VERSION_6,
>> > + .fw_api_ver = MESSAGING_VERSION_7,
>> > + .se_name = "hsm1",
>> > + .pool_name = "sram",
>> > + .fw_name_in_rfs = IMX_ELE_FW_DIR
>> > + "mx8ulpa2ext-ahab-container.img",
>> > + .soc_register = true,
>> > + .reserved_dma_ranges = true,
>> > + .imem_mgmt = true,
>> > + .se_fetch_soc_info = ele_fetch_soc_info,
>> > + },
>> > + },
>> > +};
>> > +
>> > +static const struct se_if_node_info_list imx93_info = {
>> > + .num_mu = 1,
>> > + .soc_id = SOC_ID_OF_IMX93,
>> > + .info = {
>> > + {
>> > + .se_if_id = 2,
>> > + .se_if_did = 3,
>> > + .max_dev_ctx = 4,
>> > + .cmd_tag = 0x17,
>> > + .rsp_tag = 0xe1,
>> > + .success_tag = ELE_SUCCESS_IND,
>> > + .base_api_ver = MESSAGING_VERSION_6,
>> > + .fw_api_ver = MESSAGING_VERSION_7,
>> > + .se_name = "hsm1",
>> > + .reserved_dma_ranges = true,
>> > + .soc_register = true,
>> > + },
>> > + },
>> > +};
>> > +
>> > +static const struct of_device_id se_match[] = {
>> > + { .compatible = "fsl,imx8ulp-se", .data = (void *)&imx8ulp_info},
>> > + { .compatible = "fsl,imx93-se", .data = (void *)&imx93_info},
>> > + {},
>> > +};
>> > +
>> > +static const struct se_if_node_info
>> > + *get_se_if_node_info(const struct se_if_node_info_list *info_list,
>> > + const u32 idx) {
>> > + if (idx > info_list->num_mu)
>> > + return NULL;
>> > +
>> > + return &info_list->info[idx];
>> > +}
>> > +
>> > +static int se_soc_info(struct se_if_priv *priv,
>> > + const struct se_if_node_info_list *info_list) {
>> > + const struct se_if_node_info *info;
>> > + struct soc_device_attribute *attr;
>> > + struct soc_device *sdev;
>> > + u64 serial_num;
>> > + u16 soc_rev;
>> > + int err = 0;
>> > +
>> > + info = priv->info;
>> > +
>> > + /* This function should be called once.
>> > + * Check if the soc_rev is zero to continue.
>> > + */
>> > + if (priv->soc_rev)
>> > + return err;
>> > +
>> > + if (info->se_fetch_soc_info) {
>> > + err = info->se_fetch_soc_info(priv->dev, &soc_rev, &serial_num);
>> > + if (err < 0) {
>> > + dev_err(priv->dev, "Failed to fetch SoC Info.");
>> > + return err;
>> > + }
>> > + } else {
>> > + dev_err(priv->dev, "Failed to fetch SoC revision.");
>> > + if (info->soc_register)
>> > + dev_err(priv->dev, "Failed to do SoC registration.");
>> > + err = -EINVAL;
>> > + return err;
>> > + }
>> > +
>> > + priv->soc_rev = soc_rev;
>> > + if (!info->soc_register)
>> > + return 0;
>> > +
>> > + attr = devm_kzalloc(priv->dev, sizeof(*attr), GFP_KERNEL);
>> > + if (!attr)
>> > + return -ENOMEM;
>> > +
>> > + if (FIELD_GET(DEV_GETINFO_MIN_VER_MASK, soc_rev))
>> > + attr->revision = devm_kasprintf(priv->dev, GFP_KERNEL, "%x.%x",
>> > + FIELD_GET(DEV_GETINFO_MIN_VER_MASK,
>> > + soc_rev),
>> > + FIELD_GET(DEV_GETINFO_MAJ_VER_MASK,
>> > + soc_rev));
>> > + else
>> > + attr->revision = devm_kasprintf(priv->dev, GFP_KERNEL, "%x",
>> > + FIELD_GET(DEV_GETINFO_MAJ_VER_MASK,
>> > + soc_rev));
>> > +
>> > + switch (info_list->soc_id) {
>> > + case SOC_ID_OF_IMX8ULP:
>> > + attr->soc_id = devm_kasprintf(priv->dev, GFP_KERNEL,
>> > + "i.MX8ULP");
>> > + break;
>> > + case SOC_ID_OF_IMX93:
>> > + attr->soc_id = devm_kasprintf(priv->dev, GFP_KERNEL,
>> > + "i.MX93");
>> > + break;
>> > + }
>> > +
>> > + err = of_property_read_string(of_root, "model",
>> > + &attr->machine);
>> > + if (err)
>> > + return -EINVAL;
>> > +
>> > + attr->family = devm_kasprintf(priv->dev, GFP_KERNEL, "Freescale
>> > + i.MX");
>> > +
>> > + attr->serial_number
>> > + = devm_kasprintf(priv->dev, GFP_KERNEL, "%016llX",
>> > + serial_num);
>> > +
>> > + sdev = soc_device_register(attr);
>> > + if (IS_ERR(sdev))
>> > + return PTR_ERR(sdev);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +/* interface for managed res to free a mailbox channel */ static void
>> > +if_mbox_free_channel(void *mbox_chan) {
>> > + mbox_free_channel(mbox_chan);
>> > +}
>> > +
>> > +static int se_if_request_channel(struct device *dev,
>> > + struct mbox_chan **chan,
>> > + struct mbox_client *cl,
>> > + const char *name) {
>> > + struct mbox_chan *t_chan;
>> > + int ret = 0;
>> > +
>> > + t_chan = mbox_request_channel_byname(cl, name);
>> > + if (IS_ERR(t_chan)) {
>> > + ret = PTR_ERR(t_chan);
>> > + return dev_err_probe(dev, ret,
>> > + "Failed to request %s channel.", name);
>> > + }
>> > +
>> > + ret = devm_add_action(dev, if_mbox_free_channel, t_chan);
>> > + if (ret) {
>> > + dev_err(dev, "failed to add devm removal of mbox %s\n", name);
>> > + goto exit;
>> > + }
>> > +
>> > + *chan = t_chan;
>> > +
>> > +exit:
>> > + return ret;
>> > +}
>> > +
>> > +static void se_if_probe_cleanup(struct platform_device *pdev) {
>> > + struct device *dev = &pdev->dev;
>> > + struct se_if_priv *priv;
>> > +
>> > + priv = dev_get_drvdata(dev);
>> > +
>> > + /* In se_if_request_channel(), passed the clean-up functional
>> > + * pointer reference as action to devm_add_action().
>> > + * No need to free the mbox channels here.
>> > + */
>> > +
>> > + /* free the buffer in se remove, previously allocated
>> > + * in se probe to store encrypted IMEM
>> > + */
>> > + if (priv->imem.buf) {
>> > + dmam_free_coherent(dev,
>> > + ELE_IMEM_SIZE,
>> > + priv->imem.buf,
>> > + priv->imem.phyaddr);
>> > + priv->imem.buf = NULL;
>> > + }
>> > +
>> > + /* No need to check, if reserved memory is allocated
>> > + * before calling for its release. Or clearing the
>> > + * un-set bit.
>> > + */
>> > + of_reserved_mem_device_release(dev);
>> > +}
>> > +
>> > +static void se_load_firmware(const struct firmware *fw, void
>> > +*context) {
>> > + struct se_if_priv *priv = (struct se_if_priv *) context;
>> > + const struct se_if_node_info *info = priv->info;
>> > + const u8 *se_fw_name = info->fw_name_in_rfs;
>> > + phys_addr_t se_fw_phyaddr;
>> > + u8 *se_fw_buf;
>> > +
>> > + if (!fw) {
>> > + if (priv->fw_fail > MAX_FW_LOAD_RETRIES)
>> > + dev_dbg(priv->dev,
>> > + "External FW not found, using ROM
>> > + FW.\n");
>> Isn't it true that if only one branch of a conditional statement contains a single
>> statement, you should use braces in both branches?
>
> There was no checkpatch error for this.
>
>> > + else {
>> > + /*add a bit delay to wait for firmware priv released */
>> > + msleep(20);
>> > +
>> > + /* Load firmware one more time if timeout */
>> > + request_firmware_nowait(THIS_MODULE,
>> > + FW_ACTION_UEVENT, info->fw_name_in_rfs,
>> > + priv->dev, GFP_KERNEL, priv,
>> > + se_load_firmware);
>> > + priv->fw_fail++;
>> > + dev_dbg(priv->dev, "Value of retries = 0x%x.\n",
>> > + priv->fw_fail);
>> > + }
>> > +
>> > + return;
>> > + }
>> > +
>> > + /* allocate buffer to store the SE FW */
>> > + se_fw_buf = dma_alloc_coherent(priv->dev, fw->size,
>> > + &se_fw_phyaddr, GFP_KERNEL);
>> > + if (!se_fw_buf)
>> > + goto exit;
>> > +
>> > + memcpy(se_fw_buf, fw->data, fw->size);
>> > +
>> > + if (ele_fw_authenticate(priv->dev, se_fw_phyaddr))
>> > + dev_err(priv->dev,
>> > + "Failed to authenticate & load SE firmware %s.\n",
>> > + se_fw_name);
>> > +
>> > + dma_free_coherent(priv->dev,
>> > + fw->size,
>> > + se_fw_buf,
>> > + se_fw_phyaddr);
>> > +
>> > +exit:
>> > + release_firmware(fw);
>> > +}
>> > +
>> > +static int se_if_probe(struct platform_device *pdev) {
>> > + const struct se_if_node_info_list *info_list;
>> > + const struct se_if_node_info *info;
>> > + struct device *dev = &pdev->dev;
>> > + struct se_if_priv *priv;
>> > + u32 idx;
>> > + int ret;
>> > +
>> > + if (of_property_read_u32(dev->of_node, "reg", &idx)) {
>> > + ret = -EINVAL;
>> > + goto exit;
>> > + }
>> > +
>> > + info_list = device_get_match_data(dev);
>> > + info = get_se_if_node_info(info_list, idx);
>> > + if (!info) {
>> > + ret = -EINVAL;
>> > + goto exit;
>> > + }
>> > +
>> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> > + if (!priv) {
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > +
>> > + dev_set_drvdata(dev, priv);
>> > +
>> > + /* Mailbox client configuration */
>> > + priv->se_mb_cl.dev = dev;
>> > + priv->se_mb_cl.tx_block = false;
>> > + priv->se_mb_cl.knows_txdone = true;
>> > + priv->se_mb_cl.rx_callback = se_if_rx_callback;
>> > +
>> > + ret = se_if_request_channel(dev, &priv->tx_chan,
>> > + &priv->se_mb_cl, MBOX_TX_NAME);
>> > + if (ret)
>> > + goto exit;
>> > +
>> > + ret = se_if_request_channel(dev, &priv->rx_chan,
>> > + &priv->se_mb_cl, MBOX_RX_NAME);
>> > + if (ret)
>> > + goto exit;
>> > +
>> > + priv->dev = dev;
>> > + priv->info = info;
>> > +
>> > + mutex_init(&priv->se_if_lock);
>> > + mutex_init(&priv->se_if_cmd_lock);
>> > +
>> > + /*
>> > + * Initialized priv->cmd_receiver_dev and
>> > + * priv->waiting_rsp_dev = NULL;
>> > + */
>> > + priv->max_dev_ctx = info->max_dev_ctx;
>> > + priv->cmd_tag = info->cmd_tag;
>> > + priv->rsp_tag = info->rsp_tag;
>> > + if (info->pool_name) {
>> > + priv->mem_pool = of_gen_pool_get(dev->of_node,
>> > + info->pool_name, 0);
>> > + if (!priv->mem_pool) {
>> > + dev_err(dev,
>> > + "Unable to get sram pool = %s\n",
>> > + info->pool_name);
>> > + return 0;
>> > + }
>> > + }
>> > + priv->success_tag = info->success_tag;
>> > + priv->base_api_ver = info->base_api_ver;
>> > + priv->fw_api_ver = info->fw_api_ver;
>> > +
>> > + init_completion(&priv->done);
>> > + spin_lock_init(&priv->lock);
>> > +
>> > + if (info->reserved_dma_ranges) {
>> > + ret = of_reserved_mem_device_init(dev);
>> > + if (ret) {
>> > + dev_err(dev,
>> > + "failed to init reserved memory region %d\n",
>> > + ret);
>> > + goto exit;
>> > + }
>> > + }
>> > +
>> > + ret = se_soc_info(priv, info_list);
>> > + if (ret) {
>> > + dev_err(dev,
>> > + "failed[%pe] to fetch SoC Info\n", ERR_PTR(ret));
>> > + goto exit;
>> > + }
>> > +
>> > + if (info->imem_mgmt) {
>> > + /* allocate buffer where SE store encrypted IMEM */
>> > + priv->imem.buf = dmam_alloc_coherent(dev, ELE_IMEM_SIZE,
>> > + &priv->imem.phyaddr,
>> > + GFP_KERNEL);
>> > + if (!priv->imem.buf) {
>> > + dev_err(dev,
>> > + "dmam-alloc-failed: To store encr-IMEM.\n");
>> > + ret = -ENOMEM;
>> > + goto exit;
>> > + }
>> > + }
>> > +
>> > + if (info->fw_name_in_rfs) {
>> > + ret = request_firmware_nowait(THIS_MODULE,
>> > + FW_ACTION_UEVENT,
>> > + info->fw_name_in_rfs,
>> > + dev, GFP_KERNEL, priv,
>> > + se_load_firmware);
>> > + if (ret)
>> > + dev_warn(dev, "Failed to get firmware [%s].\n",
>> > + info->fw_name_in_rfs);
>> > + ret = 0;
>> > + }
>> > +
>> > + dev_info(dev, "i.MX secure-enclave: %s interface to firmware,
>> configured.\n",
>> > + info->se_name);
>> > + return ret;
>> > +
>> > +exit:
>> > + /* if execution control reaches here, if probe fails.
>> > + * hence doing the cleanup
>> > + */
>> > + se_if_probe_cleanup(pdev);
>> > +
>> > + return ret;
>> > +}
>> > +
>> > +static int se_if_remove(struct platform_device *pdev) {
>> > + se_if_probe_cleanup(pdev);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static int se_suspend(struct device *dev) {
>> > + struct se_if_priv *priv = dev_get_drvdata(dev);
>> > + const struct se_if_node_info *info = priv->info;
>> > + int ret = 0;
>> > +
>> > + if (info && info->imem_mgmt) {
>> > + ret = se_save_imem_state(priv);
>> > + if (ret < 0)
>> > + goto exit;
>> > + priv->imem.size = ret;
>> > + }
>> > +exit:
>> > + return ret;
>> > +}
>> > +
>> > +static int se_resume(struct device *dev) {
>> > + struct se_if_priv *priv = dev_get_drvdata(dev);
>> > + const struct se_if_node_info *info = priv->info;
>> > +
>> > + if (info && info->imem_mgmt)
>> > + se_restore_imem_state(priv);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static const struct dev_pm_ops se_pm = {
>> > + RUNTIME_PM_OPS(se_suspend, se_resume, NULL) };
>> > +
>> > +static struct platform_driver se_driver = {
>> > + .driver = {
>> > + .name = "fsl-se-fw",
>> > + .of_match_table = se_match,
>> > + .pm = &se_pm,
>> > + },
>> > + .probe = se_if_probe,
>> > + .remove = se_if_remove,
>> > +};
>> > +MODULE_DEVICE_TABLE(of, se_match);
>> > +
>> > +module_platform_driver(se_driver);
>> > +
>> > +MODULE_AUTHOR("Pankaj Gupta <pankaj.gupta at nxp.com>");
>> > +MODULE_DESCRIPTION("iMX Secure Enclave Driver.");
>> > +MODULE_LICENSE("GPL");
>> > diff --git a/drivers/firmware/imx/se_ctrl.h
>> > b/drivers/firmware/imx/se_ctrl.h new file mode 100644 index
>> > 000000000000..4be2235d2170
>> > --- /dev/null
>> > +++ b/drivers/firmware/imx/se_ctrl.h
>> > @@ -0,0 +1,83 @@
>> > +/* SPDX-License-Identifier: GPL-2.0+ */
>> > +/*
>> > + * Copyright 2024 NXP
>> > + */
>> > +
>> > +#ifndef SE_MU_H
>> > +#define SE_MU_H
>> > +
>> > +#include <linux/miscdevice.h>
>> > +#include <linux/semaphore.h>
>> > +#include <linux/mailbox_client.h>
>> > +
>> > +#define MAX_FW_LOAD_RETRIES 50
>> > +
>> > +#define RES_STATUS(x) FIELD_GET(0x000000ff, x)
>> > +#define MESSAGING_VERSION_6 0x6
>> > +#define MESSAGING_VERSION_7 0x7
>> > +
>> > +struct se_imem_buf {
>> > + u8 *buf;
>> > + phys_addr_t phyaddr;
>> > + u32 size;
>> > +};
>> > +
>> > +/* Header of the messages exchange with the EdgeLock Enclave */
>> > +struct se_msg_hdr {
>> > + u8 ver;
>> > + u8 size;
>> > + u8 command;
>> > + u8 tag;
>> > +} __packed;
>> > +
>> > +#define SE_MU_HDR_SZ 4
>> > +
>> > +struct se_api_msg {
>> > + struct se_msg_hdr header;
>> > + u32 data[];
>> > +};
>> > +
>> > +struct se_if_priv {
>> > + struct se_if_device_ctx *cmd_receiver_dev;
>> > + /* Update to the waiting_rsp_dev, to be protected
>> > + * under se_if_lock.
>> > + */
>> > + struct se_if_device_ctx *waiting_rsp_dev;
>> > + /*
>> > + * prevent parallel access to the se interface registers
>> > + * e.g. a user trying to send a command while the other one is
>> > + * sending a response.
>> > + */
>> > + struct mutex se_if_lock;
>> > + /*
>> > + * prevent a command to be sent on the se interface while another one is
>> > + * still processing. (response to a command is allowed)
>> > + */
>> > + struct mutex se_if_cmd_lock;
>> > + struct device *dev;
>> > + struct gen_pool *mem_pool;
>> > + u8 cmd_tag;
>> > + u8 rsp_tag;
>> > + u8 success_tag;
>> > + u8 base_api_ver;
>> > + u8 fw_api_ver;
>> > + u32 fw_fail;
>> > + u16 soc_rev;
>> > + const void *info;
>> > +
>> > + struct mbox_client se_mb_cl;
>> > + struct mbox_chan *tx_chan, *rx_chan;
>> > +
>> > + /* Assignment of the rx_msg buffer to held till the
>> > + * received content as part callback function, is copied.
>> > + */
>> > + struct se_api_msg *rx_msg;
>> > + u32 rx_msg_sz;
>> > + struct completion done;
>> > + spinlock_t lock;
>> > + u8 max_dev_ctx;
>> > + struct se_if_device_ctx **ctxs;
>> > + struct se_imem_buf imem;
>> > +};
>> > +
>> > +#endif
>> > diff --git a/include/linux/firmware/imx/se_api.h
>> > b/include/linux/firmware/imx/se_api.h
>> > new file mode 100644
>> > index 000000000000..c47f84906837
>> > --- /dev/null
>> > +++ b/include/linux/firmware/imx/se_api.h
>> > @@ -0,0 +1,14 @@
>> > +/* SPDX-License-Identifier: GPL-2.0+ */
>> > +/*
>> > + * Copyright 2024 NXP
>> > + */
>> > +
>> > +#ifndef __SE_API_H__
>> > +#define __SE_API_H__
>> > +
>> > +#include <linux/types.h>
>> > +
>> > +#define SOC_ID_OF_IMX8ULP 0x084D
>> > +#define SOC_ID_OF_IMX93 0x9300
>> > +
>> > +#endif /* __SE_API_H__ */
>> >
>> > --
>> > 2.34.1
>> >
>> >
>
More information about the linux-arm-kernel
mailing list