[PATCH v2 4/9] power: supply: max77693: Expose CURRENT_MAX property
Artur Weber
aweber.kernel at gmail.com
Mon Jul 15 05:55:06 PDT 2024
There are two charger current limit registers:
- Fast charge current limit (which controls current going from the
charger to the battery);
- CHGIN input current limit (which controls current going into the
charger through the cable).
Both of them are aggregated in the CHARGER regulator. Add a property
that allows for reading the current limit from userspace.
Signed-off-by: Artur Weber <aweber.kernel at gmail.com>
---
Changes in v2:
- Adapted to both current limits being managed in the CHARGER regulator
---
drivers/power/supply/max77693_charger.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c
index 2001e12c9f7d..0d53f61d58ba 100644
--- a/drivers/power/supply/max77693_charger.c
+++ b/drivers/power/supply/max77693_charger.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/mfd/max77693.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
@@ -21,6 +22,7 @@ struct max77693_charger {
struct device *dev;
struct max77693_dev *max77693;
struct power_supply *charger;
+ struct regulator *regu;
u32 constant_volt;
u32 min_system_volt;
@@ -197,12 +199,33 @@ static int max77693_get_online(struct regmap *regmap, int *val)
return 0;
}
+/*
+ * There are *two* current limit registers:
+ * - CHGIN limit, which limits the input current from the external charger;
+ * - Fast charge current limit, which limits the current going to the battery.
+ * Both are managed by the CHARGER regulator.
+ */
+
+static int max77693_get_current_limit(struct max77693_charger *chg, int *val)
+{
+ int ret;
+
+ ret = regulator_get_current_limit(chg->regu);
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+
+ return 0;
+}
+
static enum power_supply_property max77693_charger_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
};
@@ -231,6 +254,9 @@ static int max77693_charger_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_ONLINE:
ret = max77693_get_online(regmap, &val->intval);
break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ ret = max77693_get_current_limit(chg, &val->intval);
+ break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = max77693_charger_model;
break;
@@ -680,6 +706,12 @@ static int max77693_charger_probe(struct platform_device *pdev)
chg->dev = &pdev->dev;
chg->max77693 = max77693;
+ /* This gets the CHARGER regulator from the parent MAX77693 device */
+ chg->regu = devm_regulator_get(chg->dev, "CHARGER");
+ if (IS_ERR(chg->regu))
+ return dev_err_probe(&pdev->dev, PTR_ERR(chg->regu),
+ "failed to get charger regulator\n");
+
ret = max77693_dt_init(&pdev->dev, chg);
if (ret)
return ret;
--
2.45.2
More information about the linux-arm-kernel
mailing list