[PATCH V3 05/15] clk: imx: imx8mp-audiomix: remove sdma root clock

[Adam Ford]

On Fri, Jun 7, 2024 at 8:28 AM Peng Fan (OSS) <peng.fan at oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan at nxp.com>
>
> There is an issue:
> SDMA3 can't work without setting AUDIOMIX_CLKEN0[SDMA2] (bit-26) to 1
>
> The workaround is:
> As the reset state of AUDIOMIX_CLKEN0[SDMA2] is enabled,
> we just need to keep it on as reset state, don't touch it
> in kernel, then every thing is same as before, if we register
> the clock in clk-audiomix, then kernel will try to disable
> it in idle.
>
> Fixes: 6cd95f7b151c ("clk: imx: imx8mp: Add audiomix block control")
> Reviewed-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---

With this patch,I found it broke the imx8mp-beacon board when running
audio through a codec connected to sai3.  Reverting this patch made
the crash go away.  Is there a way to mark the clock as critical so it
doesn't get idled?

adam
>  drivers/clk/imx/clk-imx8mp-audiomix.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
> index b381d6f784c8..88d8ba975b5a 100644
> --- a/drivers/clk/imx/clk-imx8mp-audiomix.c
> +++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
> @@ -172,7 +172,6 @@ static struct clk_imx8mp_audiomix_sel sels[] = {
>         CLK_GATE("ocrama", OCRAMA_IPG),
>         CLK_GATE("aud2htx", AUD2HTX_IPG),
>         CLK_GATE("earc_phy", EARC_PHY),
> -       CLK_GATE("sdma2", SDMA2_ROOT),
>         CLK_GATE("sdma3", SDMA3_ROOT),
>         CLK_GATE("spba2", SPBA2_ROOT),
>         CLK_GATE("dsp", DSP_ROOT),
> --
> 2.37.1
>
>