[PATCH 5/5] arm64: dts: amlogic: a4: add ao secure node

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao at amlogic.com>

Add node for board info registers, which allows getting SoC family and
board revision.

For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Amlogic A4 SoC:
soc soc0: Amlogic A4 (A113L2) Revision 40:b (1:1) Detected.

Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
index 496c3a2bcf25..901103a288e4 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
@@ -67,6 +67,12 @@ uart_b: serial at 7a000 {
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
+
+			sec_ao: ao-secure at 10220 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
 		};
 	};
 };

-- 
2.37.1