[PATCH v3 04/12] PCI: brcmstb: Use bridge reset if available

[Jim Quinlan]

The 7712 SOC has a bridge reset which can be described in the device tree.
If it is present, use it. Otherwise, continue to use the legacy method to
reset the bridge.

Signed-off-by: Jim Quinlan <james.quinlan at broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index c257434edc08..92816d8d215a 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -265,6 +265,7 @@ struct brcm_pcie {
 	enum pcie_type		type;
 	struct reset_control	*rescal;
 	struct reset_control	*perst_reset;
+	struct reset_control	*bridge;
 	int			num_memc;
 	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 	u32			hw_rev;
@@ -732,12 +733,19 @@ static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
 
 static void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val)
 {
-	u32 tmp, mask =  RGR1_SW_INIT_1_INIT_GENERIC_MASK;
-	u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
+	if (pcie->bridge) {
+		if (val)
+			reset_control_assert(pcie->bridge);
+		else
+			reset_control_deassert(pcie->bridge);
+	} else {
+		u32 tmp, mask =  RGR1_SW_INIT_1_INIT_GENERIC_MASK;
+		u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
 
-	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
-	tmp = (tmp & ~mask) | ((val << shift) & mask);
-	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+		tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+		tmp = (tmp & ~mask) | ((val << shift) & mask);
+		writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+	}
 }
 
 static void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val)
@@ -1621,6 +1629,10 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	if (IS_ERR(pcie->perst_reset))
 		return PTR_ERR(pcie->perst_reset);
 
+	pcie->bridge = devm_reset_control_get_optional_exclusive(&pdev->dev, "bridge");
+	if (IS_ERR(pcie->bridge))
+		return PTR_ERR(pcie->bridge);
+
 	ret = clk_prepare_enable(pcie->clk);
 	if (ret) {
 		dev_err(&pdev->dev, "could not enable clock\n");
-- 
2.17.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4210 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240710/e7d8f850/attachment.p7s>