[PATCH 2/2] arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references

[Andrew Halaney]

Subnodes were added to serdes0 in two different spots (due to independent
development of their consumer usage). Let's go ahead and combine those
into one reference for readability's sake.

Signed-off-by: Andrew Halaney <ahalaney at redhat.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index e54ccf4f37955..ffa38f41679d8 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -1262,6 +1262,14 @@ &dss {
 &serdes0 {
 	status = "okay";
 
+	serdes0_pcie1_link: phy at 0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
 	serdes0_usb_link: phy at 3 {
 		reg = <3>;
 		cdns,num-lanes = <1>;
@@ -1386,22 +1394,6 @@ &main_mcan4 {
 	phys = <&transceiver3>;
 };
 
-&serdes0 {
-	status = "okay";
-
-	serdes0_pcie1_link: phy at 0 {
-		reg = <0>;
-		cdns,num-lanes = <2>;
-		#phy-cells = <0>;
-		cdns,phy-type = <PHY_TYPE_PCIE>;
-		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
-	};
-};
-
-&serdes_wiz0 {
-	status = "okay";
-};
-
 &pcie1_rc {
 	status = "okay";
 	num-lanes = <2>;

-- 
2.45.2