[PATCH v3 1/2] dt-bindings: serial: samsung: fix maxItems for gs101 & document earlycon requirements
André Draszik
andre.draszik at linaro.org
Wed Jul 10 06:29:14 PDT 2024
While gs101 needs exactly two clocks for the UART, the schema doesn't
currently limit the maximum number to this and instead the default of
five from this schema is applied.
Update the schema accordingly.
Also, as pointed out in [1] before, the hand-over between earlycon and
serial console is fragile due to clocking issues, at least on Google
Tensor gs101. Therefore, document the clocking requirements for
earlycon in the description for posterity, so the information is not
lost.
Link: https://lore.kernel.org/all/d45de3b2bb6b48653842cf1f74e58889ed6783ae.camel@linaro.org/ [1]
Signed-off-by: André Draszik <andre.draszik at linaro.org>
---
Documentation/devicetree/bindings/serial/samsung_uart.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 0f0131026911..2435c3d92158 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -145,6 +145,20 @@ allOf:
- samsung,uart-fifosize
properties:
reg-io-width: false
+ clocks:
+ description: |
+ Note that for earlycon to work, the respective ipclk and pclk need
+ to be running! The bootloader normally leaves them enabled, but the
+ serial driver will start handling those clocks before the console
+ driver takes over from earlycon, breaking earlycon. If earlycon is
+ required, please revert the patch "clk: samsung: gs101: don't mark
+ non-essential (UART) clocks critical" locally first to mark them
+ CLK_IS_CRITICAL and avoid this problem.
+ maxItems: 2
+ clock-names:
+ items:
+ - const: uart
+ - const: clk_uart_baud0
unevaluatedProperties: false
--
2.45.2.803.g4e1b14247a-goog
More information about the linux-arm-kernel
mailing list