[PATCH net-next v17 10/14] net: ethtool: pse-pd: Target the command to the requested PHY
Maxime Chevallier
maxime.chevallier at bootlin.com
Mon Jul 8 23:30:33 PDT 2024
PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.
As we don't get the PHY directly from the netdev's attached phydev, also
adjust the error messages.
Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
---
net/ethtool/pse-pd.c | 31 +++++++++++++++++++------------
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index ba46c9c8b12d..0f37ff5de7f0 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -28,17 +28,15 @@ struct pse_reply_data {
/* PSE_GET */
const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
- [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+ [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
};
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
struct netlink_ext_ack *extack,
struct pse_reply_data *data)
{
- struct phy_device *phydev = dev->phydev;
-
if (!phydev) {
- NL_SET_ERR_MSG(extack, "No PHY is attached");
+ NL_SET_ERR_MSG(extack, "No PHY found");
return -EOPNOTSUPP;
}
@@ -58,13 +56,20 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
{
struct pse_reply_data *data = PSE_REPDATA(reply_base);
struct net_device *dev = reply_base->dev;
+ struct nlattr **tb = info->attrs;
+ struct phy_device *phydev;
int ret;
ret = ethnl_ops_begin(dev);
if (ret < 0)
return ret;
- ret = pse_get_pse_attributes(dev, info->extack, data);
+ phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PSE_HEADER],
+ info->extack);
+ if (IS_ERR(phydev))
+ return -ENODEV;
+
+ ret = pse_get_pse_attributes(phydev, info->extack, data);
ethnl_ops_complete(dev);
@@ -206,7 +211,7 @@ static void pse_cleanup_data(struct ethnl_reply_data *reply_base)
/* PSE_SET */
const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
- [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+ [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
@@ -219,12 +224,12 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
static int
ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
{
- struct net_device *dev = req_info->dev;
struct nlattr **tb = info->attrs;
struct phy_device *phydev;
- phydev = dev->phydev;
- if (!phydev) {
+ phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PSE_HEADER],
+ info->extack);
+ if (IS_ERR_OR_NULL(phydev)) {
NL_SET_ERR_MSG(info->extack, "No PHY is attached");
return -EOPNOTSUPP;
}
@@ -255,12 +260,14 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
static int
ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
{
- struct net_device *dev = req_info->dev;
struct nlattr **tb = info->attrs;
struct phy_device *phydev;
int ret = 0;
- phydev = dev->phydev;
+ phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PSE_HEADER],
+ info->extack);
+ if (IS_ERR_OR_NULL(phydev))
+ return -ENODEV;
if (tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]) {
unsigned int pw_limit;
--
2.45.1
More information about the linux-arm-kernel
mailing list