[PATCH v11 1/6] dt-bindings: media: platform: visconti: Add Toshiba Visconti Video Input Interface
Yuji Ishikawa
yuji2.ishikawa at toshiba.co.jp
Mon Jul 8 17:08:43 PDT 2024
Adds the Device Tree binding documentation that allows to describe
the Video Input Interface found in Toshiba Visconti SoCs.
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa at toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu at toshiba.co.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
Changelog v2:
- no change
Changelog v3:
- no change
Changelog v4:
- fix style problems at the v3 patch
- remove "index" member
- update example
Changelog v5:
- no change
Changelog v6:
- add register definition of BUS-IF and MPU
Changelog v7:
- remove trailing "bindings" from commit header message
- remove trailing "Device Tree Bindings" from title
- fix text wrapping of description
- change compatible to visconti5-viif
- explicitly define allowed properties for port::endpoint
Changelog v8:
- Suggestion from Krzysztof Kozlowski
- rename bindings description file
- use block style array instead of inline style
- remove clock-lane (as it is fixed at position 0)
- update sample node's name
- use lowercase hex for literals
- Suggestion from Laurent Pinchart
- update description message port::description
- remove port::endpoint::bus-type as it is fixed to <4>
- remove port::endpoint::clock-lanes from example
- add port::endpoint::data-lanes to required parameters list
- fix sequence of data-lanes: <1 2 3 4> because current driver does not support data reordering
- update port::endpoint::data-lanes::description
- remove redundant type definition for port::endpoint::data-lanes
Changelog v9:
- place "required" after "properties"
- dictionary ordering of properties
Changelog v10:
- no change
Changelog v11:
- no change
.../media/toshiba,visconti5-viif.yaml | 105 ++++++++++++++++++
1 file changed, 105 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml
diff --git a/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml b/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml
new file mode 100644
index 0000000000..97e8bda427
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/toshiba,visconti5-viif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 SoC Video Input Interface
+
+maintainers:
+ - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu at toshiba.co.jp>
+
+description: |-
+ Toshiba Visconti5 SoC Video Input Interface (VIIF) receives MIPI CSI2 video
+ stream, processes the stream with image signal processors (L1ISP, L2ISP),
+ then stores pictures to main memory.
+
+properties:
+ compatible:
+ const: toshiba,visconti5-viif
+
+ reg:
+ items:
+ - description: Registers for capture control
+ - description: Registers for CSI2 receiver control
+ - description: Registers for bus interface unit control
+ - description: Registers for Memory Protection Unit
+
+ interrupts:
+ items:
+ - description: Sync Interrupt
+ - description: Status (Error) Interrupt
+ - description: CSI2 Receiver Interrupt
+ - description: L1ISP Interrupt
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 input port, with a single endpoint connected to the CSI-2 transmitter.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ additionalProperties: false
+
+ properties:
+ data-lanes:
+ description: VIIF supports 1, 2, 3 or 4 data lanes
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ clock-noncontinuous: true
+ link-frequencies: true
+ remote-endpoint: true
+
+ required:
+ - clock-noncontinuous
+ - data-lanes
+ - link-frequencies
+ - remote-endpoint
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ video at 1c000000 {
+ compatible = "toshiba,visconti5-viif";
+ reg = <0 0x1c000000 0 0x6000>,
+ <0 0x1c008000 0 0x400>,
+ <0 0x1c00e000 0 0x1000>,
+ <0 0x2417a000 0 0x1000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi_in0: endpoint {
+ clock-noncontinuous;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <456000000>;
+ remote-endpoint = <&imx219_out0>;
+ };
+ };
+ };
+ };
--
2.25.1
More information about the linux-arm-kernel
mailing list