[PATCH v5 net-next 1/2] dt-bindings: net: airoha: Add EN7581 ethernet controller
Lorenzo Bianconi
lorenzo at kernel.org
Mon Jul 8 10:03:19 PDT 2024
> On Thu, Jul 04, 2024 at 10:08:10AM +0200, Lorenzo Bianconi wrote:
> > Introduce device-tree binding documentation for Airoha EN7581 ethernet
> > mac controller.
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
> > ---
> > .../bindings/net/airoha,en7581-eth.yaml | 146 ++++++++++++++++++
> > 1 file changed, 146 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
> > new file mode 100644
> > index 000000000000..f4b1f8afddd0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
> > @@ -0,0 +1,146 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/airoha,en7581-eth.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Airoha EN7581 Frame Engine Ethernet controller
> > +
> > +allOf:
> > + - $ref: ethernet-controller.yaml#
>
> Again, to rephrase, what are you using from this binding? It does not
> make sense for the parent and child both to use it.
Below I reported the ethernet dts node I am using (I have not posted the dts
changes yet):
eth0: ethernet at 1fb50000 {
compatible = "airoha,en7581-eth";
reg = <0 0x1fb50000 0 0x2600>,
<0 0x1fb54000 0 0x2000>,
<0 0x1fb56000 0 0x2000>;
reg-names = "fe", "qdma0", "qdma1";
resets = <&scuclk EN7581_FE_RST>,
<&scuclk EN7581_FE_PDMA_RST>,
<&scuclk EN7581_FE_QDMA_RST>,
<&scuclk EN7581_XSI_MAC_RST>,
<&scuclk EN7581_DUAL_HSI0_MAC_RST>,
<&scuclk EN7581_DUAL_HSI1_MAC_RST>,
<&scuclk EN7581_HSI_MAC_RST>,
<&scuclk EN7581_XFP_MAC_RST>;
reset-names = "fe", "pdma", "qdma", "xsi-mac",
"hsi0-mac", "hsi1-mac", "hsi-mac",
"xfp-mac";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
gdm1: mac at 1 {
compatible = "airoha,eth-mac";
reg = <1>;
phy-mode = "internal";
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
I am using phy related binding for gdm1:mac at 1 node. gdm1 is the GMAC port used
as cpu port by the mt7530 dsa switch
switch: switch at 1fb58000 {
compatible = "airoha,en7581-switch";
reg = <0 0x1fb58000 0 0x8000>;
resets = <&scuclk EN7581_GSW_RST>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
gsw_port1: port at 1 {
reg = <1>;
label = "lan1";
phy-mode = "internal";
phy-handle = <&gsw_phy1>;
};
gsw_port2: port at 2 {
reg = <2>;
label = "lan2";
phy-mode = "internal";
phy-handle = <&gsw_phy2>;
};
gsw_port3: port at 3 {
reg = <3>;
label = "lan3";
phy-mode = "internal";
phy-handle = <&gsw_phy3>;
};
gsw_port4: port at 4 {
reg = <4>;
label = "lan4";
phy-mode = "internal";
phy-handle = <&gsw_phy4>;
};
port at 6 {
reg = <6>;
label = "cpu";
ethernet = <&gdm1>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
gsw_phy1: ethernet-phy at 1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <9>;
phy-mode = "internal";
};
gsw_phy2: ethernet-phy at 2 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <10>;
phy-mode = "internal";
};
gsw_phy3: ethernet-phy at 3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <11>;
phy-mode = "internal";
};
gsw_phy4: ethernet-phy at 4 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <12>;
phy-mode = "internal";
};
};
};
>
> > +
> > +maintainers:
> > + - Lorenzo Bianconi <lorenzo at kernel.org>
> > +
> > +description:
> > + The frame engine ethernet controller can be found on Airoha SoCs.
> > + These SoCs have multi-GMAC ports.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - airoha,en7581-eth
> > +
> > + reg:
> > + items:
> > + - description: Frame engine base address
> > + - description: QDMA0 base address
> > + - description: QDMA1 base address
> > +
> > + reg-names:
> > + items:
> > + - const: fe
> > + - const: qdma0
> > + - const: qdma1
> > +
> > + interrupts:
> > + items:
> > + - description: QDMA lan irq0
> > + - description: QDMA lan irq1
> > + - description: QDMA lan irq2
> > + - description: QDMA lan irq3
> > + - description: QDMA wan irq0
> > + - description: QDMA wan irq1
> > + - description: QDMA wan irq2
> > + - description: QDMA wan irq3
> > + - description: FE error irq
> > + - description: PDMA irq
> > +
> > + resets:
> > + maxItems: 8
> > +
> > + reset-names:
> > + items:
> > + - const: fe
> > + - const: pdma
> > + - const: qdma
> > + - const: xsi-mac
> > + - const: hsi0-mac
> > + - const: hsi1-mac
> > + - const: hsi-mac
> > + - const: xfp-mac
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > +patternProperties:
> > + "^mac@[1-4]$":
>
> 'ethernet' is the defined node name for users of
> ethernet-controller.yaml.
Looking at the dts above, ethernet is already used by the parent node.
This approach has been already used here [0],[1],[2]. Is it fine to reuse it?
Regards,
Lorenzo
[0] https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/mediatek/mt7622.dtsi#L964
[1] https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts#L136
[2] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/net/mediatek%2Cnet.yaml#L370
>
> > + type: object
> > + unevaluatedProperties: false
> > + $ref: ethernet-controller.yaml#
> > + description:
> > + Ethernet GMAC port associated to the MAC controller
> > + properties:
> > + compatible:
> > + const: airoha,eth-mac
> > +
> > + reg:
> > + minimum: 1
> > + maximum: 4
> > + description: GMAC port identifier
> > +
> > + required:
> > + - reg
> > + - compatible
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - resets
> > + - reset-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + #include <dt-bindings/clock/en7523-clk.h>
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + eth0: ethernet at 1fb50000 {
> > + compatible = "airoha,en7581-eth";
> > + reg = <0 0x1fb50000 0 0x2600>,
> > + <0 0x1fb54000 0 0x2000>,
> > + <0 0x1fb56000 0 0x2000>;
> > + reg-names = "fe", "qdma0", "qdma1";
> > +
> > + resets = <&scuclk 44>,
> > + <&scuclk 30>,
> > + <&scuclk 31>,
> > + <&scuclk 6>,
> > + <&scuclk 15>,
> > + <&scuclk 16>,
> > + <&scuclk 17>,
> > + <&scuclk 26>;
> > + reset-names = "fe", "pdma", "qdma", "xsi-mac",
> > + "hsi0-mac", "hsi1-mac", "hsi-mac",
> > + "xfp-mac";
> > +
> > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + mac1: mac at 1 {
> > + compatible = "airoha,eth-mac";
> > + reg = <1>;
> > + };
> > + };
> > + };
> > --
> > 2.45.2
> >
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240708/4a03f295/attachment.sig>
More information about the linux-arm-kernel
mailing list