[PATCH 3/4] mmc: sdhci-esdhc-imx: add option to not change pinctrl state in suspend
Bough Chen
haibo.chen at nxp.com
Sun Jul 7 19:33:34 PDT 2024
> -----Original Message-----
> From: Ciprian Marian Costea (OSS) <ciprianmarian.costea at oss.nxp.com>
> Sent: 2024年7月5日 21:47
> To: Bough Chen <haibo.chen at nxp.com>; Adrian Hunter
> <adrian.hunter at intel.com>; Ulf Hansson <ulf.hansson at linaro.org>; Shawn Guo
> <shawnguo at kernel.org>; Sascha Hauer <s.hauer at pengutronix.de>;
> Pengutronix Kernel Team <kernel at pengutronix.de>; Fabio Estevam
> <festevam at gmail.com>
> Cc: linux-kernel at vger.kernel.org; linux-mmc at vger.kernel.org;
> imx at lists.linux.dev; linux-arm-kernel at lists.infradead.org; dl-S32
> <S32 at nxp.com>; Ciprian Marian Costea (OSS)
> <ciprianmarian.costea at oss.nxp.com>
> Subject: [PATCH 3/4] mmc: sdhci-esdhc-imx: add option to not change pinctrl
> state in suspend
>
> On some boards such as S32G based, changing the pinctrl state in suspend
> routine may not be supported.
If so, why not dop the "sleep" pinctrl in device tree file?
Best Regards
Haibo Chen
>
> For this scenario the newly introduced flag 'ESDHC_FLAG_SKIP_PINCTRL_SLEEP'
> is used.
>
> Signed-off-by: Ciprian Costea <ciprianmarian.costea at oss.nxp.com>
> ---
> drivers/mmc/host/sdhci-esdhc-imx.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
> b/drivers/mmc/host/sdhci-esdhc-imx.c
> index 8f0bc6dca2b0..c3ff7fccd051 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -204,6 +204,9 @@
> /* The IP does not have GPIO CD wake capabilities */
> #define ESDHC_FLAG_SKIP_CD_WAKE BIT(18)
>
> +/* The IP does not support transition to pinctrl sleep state */ #define
> +ESDHC_FLAG_SKIP_PINCTRL_SLEEP BIT(19)
> +
> enum wp_types {
> ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
> ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
> @@ -301,7 +304,8 @@ static struct esdhc_soc_data usdhc_s32g2_data = {
> .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING
> | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
> | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
> - | ESDHC_FLAG_SKIP_ERR004536 |
> ESDHC_FLAG_SKIP_CD_WAKE,
> + | ESDHC_FLAG_SKIP_ERR004536 |
> ESDHC_FLAG_SKIP_CD_WAKE
> + | ESDHC_FLAG_SKIP_PINCTRL_SLEEP,
> };
>
> static struct esdhc_soc_data usdhc_imx7ulp_data = { @@ -1884,9 +1888,11
> @@ static int sdhci_esdhc_suspend(struct device *dev)
> if (ret)
> return ret;
>
> - ret = pinctrl_pm_select_sleep_state(dev);
> - if (ret)
> - return ret;
> + if (!(imx_data->socdata->flags & ESDHC_FLAG_SKIP_PINCTRL_SLEEP)) {
> + ret = pinctrl_pm_select_sleep_state(dev);
> + if (ret)
> + return ret;
> + }
>
> ret = mmc_gpio_set_cd_wake(host->mmc, true);
>
> --
> 2.45.2
More information about the linux-arm-kernel
mailing list