[PATCH 1/4] dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth

[Krzysztof Kozlowski]

On 05/07/2024 13:20, Yang Li via B4 Relay wrote:
> From: Yang Li <yang.li at amlogic.com>
> 
> Add binding document for Amlogic Bluetooth chipsets attached over UART.
> 
> Signed-off-by: Yang Li <yang.li at amlogic.com>
> ---
>  .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml  | 62 ++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml
> new file mode 100644
> index 000000000000..d59e3206af62
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2024 Amlogic, Inc. All rights reserved
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/bluetooth/amlogic,w155s2-bt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Bluetooth chips
> +
> +description:
> +  This binding describes UART-attached Amlogic bluetooth chips.

Do not say that binding describes a binding. It is not helpful. Describe
the hardware instead.

> +
> +maintainers:
> +  - Yang Li <yang.li at amlogic.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: amlogic,w155s2-bt
> +      - items:
> +          - enum:
> +              - amlogic,w265s1-bt
> +              - amlogic,w265p1-bt
> +              - amlogic,w265s2-bt
> +          - const: amlogic,w155s2-bt
> +
> +  amlogic,wcn-pwrseq:

??

> +    default: 0
> +    description: specify the power sequence used to power on Bluetooth
> +    $ref: /schemas/types.yaml#/definitions/uint32

What? I have no clue what is this and have no clue what to say here. Drop.

> +
> +  amlogic,firmware:
> +    description: specify the path of firmware bin to load
> +    $ref: /schemas/types.yaml#/definitions/string-array

Srsly, it's third case in your bindings. Do not re-invent the wheel but
use existing, common properties. How to find them? Well, git grep or ask
your colleagues...




> +
> +  amlogic,antenna-number:
> +    default: 1
> +    description: number of antenna

Useless description. Do not repeat the property name but explain what is
it and how it is used.

Or drop the property.

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  amlogic,a2dp-sink-enable:
> +    default: 0
> +    description: enable sink mode with controller

Again, not possible to figure out.

NAK

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +required:
> +  - compatible
> +  - amlogic,wcn-pwrseq
> +  - amlogic,firmware
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    serial {

Drop

> +        bluetooth {
> +            compatible = "amlogic,w155s2-bt";
> +            amlogic,wcn-pwrseq = <1>;

Joking, right?



Best regards,
Krzysztof