[PATCH v2 19/23] clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support

[Stephen Boyd]

Quoting Ryan Walklin (2024-07-03 03:51:09)
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> index b0b8dba239aec..36b9eadb80bb5 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> @@ -7,6 +7,7 @@
>  #include <linux/clk-provider.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_address.h>

What is this include for?

>  #include <linux/platform_device.h>
>  #include <linux/reset.h>
>  
> @@ -290,6 +301,16 @@ static int sunxi_de2_clk_probe(struct platform_device *pdev)
>                         "Couldn't deassert reset control: %d\n", ret);
>                 goto err_disable_mod_clk;
>         }
> + 
> +       /*
> +        * The DE33 requires these additional (unknown) registers set
> +        * during initialisation.
> +        */
> +       if (of_device_is_compatible(pdev->dev.of_node,
> +                                   "allwinner,sun50i-h616-de33-clk")) {
> +               writel(0, reg + 0x24);
> +               writel(0x0000A980, reg + 0x28);

Lowercase hex please. Did the downstream driver have names for these
register offsets by way of some sort of #define?

> +       }
>  
>         ret = devm_sunxi_ccu_probe(&pdev->dev, reg, ccu_desc);
>         if (ret)