[PATCH v2 1/2] media: dt-bindings: Add Sony IMX728

[Krzysztof Kozlowski]

On 28/06/2024 23:17, Spencer Hill wrote:
> Add bindings for Sony IMX728.
> 
> Signed-off-by: Spencer Hill <shill at d3engineering.com>


> +
> +  clocks:
> +    description: Clock frequency from 18 to 30MHz
> +    maxItems: 1
> +
> +  clock-names:
> +    const: inck

clock-names do not seem that useful - name is pretty obvious. Drop.

> +
> +  reset-gpios:
> +    maxItems: 1
> +    description:
> +      Specifier for the GPIO connected to the XCLR (System Reset) pin.
> +
> +  avdd-supply:
> +    description: Analog power supply (3.3V)
> +
> +  dvdd-supply:
> +    description: Digital core power supply (1.1V)
> +
> +  ovdd-supply:
> +    description: Digital I/O power supply (1.8V)
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: ../video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            oneOf:
> +              - items:
> +                - const: 1
> +                - const: 2
> +              - items:
> +                - const: 1
> +                - const: 2
> +                - const: 3
> +                - const: 4
> +          link-frequencies: true

Drop, not needed.

> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +
> +    required:
> +      - endpoint
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        clock-frequency = <400000>;

Drop

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        camera at 1a {
> +            compatible = "sony,imx728";
> +            reg = <0x1a>;
> +
> +            clocks = <&fixed_clock>;
> +            clock-names = "inck";
> +
> +            reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
> +
> +            avdd-supply = <&camera_vdda_3v3>;
> +            dvdd-supply = <&camera_vddd_1v1>;
> +            ovdd-supply = <&camera_vddo_1v8>;
> +
> +            port {
> +                camera1: endpoint {
> +                    remote-endpoint = <&csi2_phy0>;
> +                    data-lanes = <1 2 3 4>;
> +                    link-frequencies = /bits/ 64 <800000000>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ef6be9d95143..a2811249ac8c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20589,6 +20589,13 @@ T:     git git://linuxtv.org/media_tree.git
>  F:     Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
>  F:     drivers/media/i2c/imx415.c
> 
> +SONY IMX728 SENSOR DRIVER
> +M:     Spencer Hill <shill at d3engineering.com>
> +L:     linux-media at vger.kernel.org
> +S:     Maintained
> +F:     Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
> +F:     drivers/media/i2c/imx728.c

There is no such file. Patches must be bisectable.

Best regards,
Krzysztof